Part Number: MAX3223E Tool/software: Dears:
when customer use below circuit, they found MAX3223E can't use auto power down function, they need pull up forceon pin, then MAX3223E can work. Could you please help check if below circuit is ok ? Thanks.…
Part Number: MAX3223E Other Parts Discussed in Thread: TVS1401 Hi,
My customer want to have RS232 transceiver with supporting Vrx > 36V, currently MAX13223E could support this requirement.
May I know whether TI have similar part?
According to TI cross…
Part Number: MAX3223E Other Parts Discussed in Thread: TRSF3221E , TRS3221E , MAX3221E Hi team,
If the use-case is that 2nd channel (DIN2・ DOUT2 ・ RIN2 ・ ROUT2 ) was not used, how can customer to set pins? Open or pull-up to Vcc or pull-down to GND?
Regards, …
Part Number: MAX3223E Other Parts Discussed in Thread: MAX3223 , Hello team -
TI sent EOL notice for the MAX3223 and recommended the MAX3223E as a pin to pin replacement. Can you tell us what the differences are between MAX3223IPW and MAX3223EIPW. We are…
Part Number: MAX3223 I connect 2 MAX3223 transceivers together, I am seeing a sawtooth/rippling waveform on the positive pulse on pin 17 (Tx) output. There is a 6" cable between the RS-232 transceivers. One of the transceivers appear much worst then the…
Part Number: MAX3223E Hi Team,
Good day. I am posting this inquiry on behalf of the customer.
"I have been experiencing a very high failure rate using this part in a 3.3 volt system. The signature of the failure is an extremely high current draw…
Part Number: MAX3223-EP Team,
My customer had the following request:
I was asked to find out if a socket exists for TI part MAX3223MDBREP that can be installed onto a CCA and used for pre-screening purposes. Do you know if such a socket exists?
Let…
Part Number: MAX3223E Hi, I'm using MAX3223E as transceiver to debug Uart port and serial application used is TeraTerm or Putty. Issue seen is, after 15-20 minute serial application(Teraterm) is getting hang, it needs restart to get the prints again…
Part Number: MAX3223 Hi,
Is the temperature change the reason why the maximum current consumption during auto powerdown is 10μA?
Or individual variation?
Best regards,
Part Number: MAX3223 Iam using MAX3223IDBR in my design.
component body marking read to be as
"MB3223I 84KG4 COHP"
What does the 2nd and 3rd line refers to?
