Hi Guys,
We've got a DM365 system which we were running on the DVSDK2.10. As there are improvements in the SDHC and USB controllers in the later kernels, we want to move to the newer DVSDK, and Arago kernel build.
I downloaded DVSDK3.10, and…
Hi Vrund,
>> 1) after power on primary bootloader ( which is inside AMIC110) based on syspin settings decides from where to boot.(let's say nand flash) >> 2) after deciding, secondary bootloader (which is there in nand flash) takes control and boot…
Part Number: DRA821U Hi team,
Here's an issue from the customer may need your help:
When using Port2 in 2G CPSW in MCU domain as an Ethernet entity and a port interconnect in 5G, the number of buffers configured in macl for transmit and receive is…
Other Parts Discussed in Thread: SYSCONFIG I am currently using an OMAP3530 with an 8bit video decoder chip (MAX9526) and trying to configure the ISP interface on our OMAP processor to write YUV422 to memory without any resizers filters etc.
However…
Other Parts Discussed in Thread: PGA460 , TUSS4470 , MSP430FR6047 , TUSS4440 , BOOSTXL-PGA460 , BOOSTXL-TUSS4470 , EVM430-FR6047 , BOOSTXL-TUSS4440 , TDC1000 , TDC1011 Ultrasonic sensing uses the propagating sound waves at a frequency above the range…
msp430f5509.pdf Hello Ryan
Thank you for your replay. Attached is the datasheet. In page 21, The note describe that Applying a 1-MΩ resistor to ground is recommended. the question is that if not apply this resistor, what will happen?
Part Number: SN74LS245 Other Parts Discussed in Thread: SN74LS374 I'm pulling my hair out and banging my head against the wall. I've been trying to solve a very strange problem with the SN74LS245NSR chip for the past two weeks to no avail. Here's the…
Part Number: TLV320AIC3104-Q1
In our system, there will be a pop noise when the power is turned on. We have tried to connect IOVDD to 1.8V, the pop noise will disappear.
Is 1.8V recommended for IOVDD? Thank you rse008_mb - 202008012.pdf
