So, I'm working with this device via a board from Mikroe called the I2C Mux 4 Click. I know TI does not support other products, but I have a couple of questions about the TCA9543A, which is on the board.
I can see the TCA9543A at address 0x70; my writing…
I had a look at the forum and found some other resources.
SPI debug steps: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/775262/faq-ads129x-i-m-having-trouble-communicating-with-my-ads129x-device-via-spi-what…
Part Number: MCT8316A Tool/software: Hi!
In the datasheet it’s written that this driver can support up to 35V DC input, but only mentions about driving 12V ot 24V BLDC sensorless motors.
Can it work normally with motors that are rated to 34-35V DC…
Yes, i have changed in both the files.
Logs are attached as you asked.
Fullscreen
MMC_info.txt
Download
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool…
Hi Michael,
I'm Martin, Pablo's collague.
First of all, thank you very much for your prompt response.
After that, I wanted to add some additional comments regarding the issue we are facing. To provide you with a better escenario description, our…
Part Number: TPS25750 Other Parts Discussed in Thread: TPS25730 , TPS25730EVM , , USB-PD-CHG-EVM-01 , BQ25731 , BQ25792 , TPS25751 Hi I am facing the same problems as described in this 2 year old case. The GATE voltage is not high enough to turn on the…
I'm a bit suspicious of this description, not least since it looks self-contradictory.
I think it's not an accident that EEPROM_CACHE[],EEPROM_PAGE_ADDRESS, and EEPROM_CTRL are consecutive. My guess is that you should write (maybe as a single transaction…
Hi
Is it critical for the operation of the chip that the resistor networks has to be 13 meg ? I have looked at designs from Mikroe for one of the click boards and it seems that they did not apply that rule, I have managed to get to my required voltage…
I am using a module from Mikroe:
https://www.mikroe.com/balancer-5-click
For your reference I have even attached the schematic provided by Mikroelectronika.
Can you find any reason why it is not working?
balancer-5-click-schematic-v100.pdf
Hi Prakash,
1. Open up Fusion Digital Power Designer
2. Click I2C GUI from the main menu
...
3. Click Tools at the top of the screen, and click SAA/SMBUS/I2C Tool. This will take you to the menu where you can send any transaction type with any…
