Part Number: MSP430F5338 Other Parts Discussed in Thread: MSP430WARE , SYSBIOS Tool/software: Code Composer Studio Hello,
I have been tasked with building an MSP430 project that requires a version of msp430ware/driverlib that is unavailable on the TI website…
Part Number: MSP430F5338 Other Parts Discussed in Thread: MSP430F6438 , MSP-FET Tool/software: Code Composer Studio A microprocessor that I am using appears to be causing Code Composer Studio to crash when attempting to debug it.
I am working with two…
Hello Hiroshi-san,
The EVM has two MSP430 devices. One is the ezFET MSP430F5528 which is also the USB<>UART IF and the other is DRV8262 controller MSP430F5338. Firmware update only updates the DRV controller MSP430. It will not affect the USB<>UART MSP430…
Part Number: MSP430F5338 Tool/software: Linux We are using MSP430.dll to load the firmware into our device. We want to burn the fuse/set bit to the device after loading the firmware. I am not the original developer of the code that calls the dll and I…
Other Parts Discussed in Thread: MSP430G2553 , MSP430F5528 , MSP430F5338 , MSPDRIVERLIB There are a few things that can cause an EVM to not connect to the GUI on the computer. Below walks through some common troubleshooting steps to fix EVM connectivity issues…
Part Number: MSP430F5338 Other Parts Discussed in Thread: TMP75 We are using a TMP75 temperature sensor as a slave to our MSP430F5338. I have configured with the code which was given as example to configure ACLK as input to the I2C line. We are facing…
Part Number: MSP430F5338
Hi,.
We are designing a system in which MSP430F5338 is used.
For powering the RTC in the MSP430 during shutdown, we have used a 3.5V 0.22uF super capacitor connected to VBAT.
The question is that, how long will the super cap…
Part Number: MSP430F5338 Hi MSP430 Team,
Good afternoon, my customer is interested in the quickest way to enable RTC after reboot:
It seems the RTC is placed in HOLD automatically upon re-boot and then needs to be enable and re-configured… we are trying…
Part Number: MSP430F5338 Hello,
We were using one I2C in our previous device, and currently we are planning to increase the feature set. Neither datasheet or User manuel calling out the pin number for the 2 poarts.
Can some one tell me exact pinouts or…
Part Number: MSP430F5338 Hi,
I am using MSP430F5338 in our project. For High frequency generation, we require 16MHz and for RTC, it is 32KHz.
We have planned to use crystal for both. How to choose the crystal? The load capacitance matching parameters…