Part Number: MSP430FR2155 Other Parts Discussed in Thread: MSP430FR2355 , Hi
I try to create a i2c interrupt service routine on my app.
and enable it in the initialization.
__bis_SR_register( GIE);
However, app always get trap.
I found out the the vector…
Part Number: MSP430FR2155 Other Parts Discussed in Thread: BQ34Z100 Hi
I try to send from msp430 to bq34z100 for the control sub command to get chemical id.
The first command "AA 00 08 00" and
second command "AA 00 AB 07 01"
the first…
Part Number: MSP430FR2155 Hi
I am working on a timer TB0 CCR0 routine
I have an issue here and see if TI expert can give me some pointer.
I simplify app so that timer run 240 clock cycle and restart.
I found that in the beginning, the Timer kick every…
Other Parts Discussed in Thread: TIDA-010030 Hi
We use MSP430Fr2115 for our target board.
The reference board is TIDA-010030.
We try to change clock speed from 12M to 24M.
(we use scope to verify that clock speed is correct value)
and we see two issues…
Hi
We get an verification error while download image.
I attach an image for the error message.
It was working for a while until recently.
The board change clock speed from 12M to 24M.
from
CSCTL1 |= 0xe;
CSCTL2 = (CSCTL2 & ~FLLN) | 0X177;
to
CSCTL2…
Hi
i use jtag debugger for msp430fr21155. i use printf to print to the console and it works fine.
However, it always break at trgmsg.c function __TI_writemsg() line 115. And I have no breakpoint when i run program.
How can i fix this issue?
Thanks
Part Number: MSP430FR2155 Hello,
I have to write an upgradable firmware and I need support. Could you send me an code sample? Linker options or anything else?
thank you.
Part Number: MSP430FR2155 MCU: FR2155
Is it allowed to write user data to 0xECA0 addresses?
If so, is there anything special about how to write?
Thanks!
Hi
i try to set one breakpoint and enter debug mode.
When i hit F8 , it did not stop at break point but it stop before my breakpoint.
How can i fix this
Part Number: MSP430FR2155 Other Parts Discussed in Thread: TIDA-010030 , https://www.ti.com/tool/TIDA-010030
https://www.ti.com/lit/zip/tidry27
From the reference design of the battery management system given above. I found from the datasheet of the controller…