Part Number: OPA4990 Other Parts Discussed in Thread: TLV9304 , , OPA4991 , OPA2991 , TLV9352 , TLV9354 Hi sirs,
Please kindly suggest if we have p-p solution to replace MC33174DT.
Vin 40V, 4Ch.
Thanks a lot!
BR,
Sean Liao
Part Number: TLE2024M Other Parts Discussed in Thread: TLE2024 , , OPA4990 , OPA4991 Hello Sir,
Can you advise me if TLE2024MDW is already obsoleted or not.
If yes, can you recommend a replacement ?
1.83 V × 9 = 16.47 V. But the LM224A does not have rail-to-rail outputs; the V OH specification shows that even a small output current requires a headroom of 1.5 V to the positive supply.
You could change the amplification factor so that the output…
Part Number: DAC7716 Other Parts Discussed in Thread: DCP020515D , , REF5050 , ADS8883 , OPA4990 , DAC8234 , DAC8734 , PGA855
Tool/software:
Hello,
I am using two DAC7716 on our board and they are being powered by a DCP020515D part. Through testing at around…
Hello Yuxi,
The TI cross reference search suggests OPA4990; I prefer the OPA4991 as an alternative ; better match to Vos, SR, GBWP.
If IIB is critical then a different solution is needed. In that case, I'd need to know all the important parameters.…
Part Number: LM224A Other Parts Discussed in Thread: OPA4990 , TLV9354 Hi Team,
Customer uses LM224ADR in +15V/-8V supply power condition, and they want to know what's the MIN output voltage? Could yo please help check it? I cannot find it in Datasheet,…
The TL074 has neither rail-to-rail inputs (the input range does not include V−) nor rail-to-rail outputs.
Here is a search for these parameters: ti.com/amplifier-circuit/op-amps/general-purpose/products.html#78=In;Out&480=4;4&1261max=30;48…
Hi Michael,
The POPA devices are pre-production samples. Once the device RTMs the "P" device will be removed and only the OPA will be available. I would recommend the OPA4991 or OPA4990 over the OPA417x device. The OPA4990/1 have better performance, are…
Raymond,
The TL494 example doesn't go to 95%. Below is a quad op amp, solution. C2 should be 1uF to reduce reference voltage ripple. However the simulation crashed that way. All four op amps are OPA4990 channels (LMV321 model inserted twice because…