Part Number: SK-AM68 Other Parts Discussed in Thread: SK-TDA4VM Tool/software: I want to connect an Intel-9260 WiFi card to the SK-AM68A as per this https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-am68a/09_02_00/exports/docs/system/Demo_User_Guides…
Part Number: SK-AM68 Tool/software: Hi!
I have downloaded schematic for SK-AM68. It only contains schematic for the daughter board i. e. small card with processor and RAM. where could I get schematic for base card for interface of camera, USB, display…
Part Number: SK-AM68 Tool/software: Hi *,
in DS is stated that every not used ADC pin can be directly connected to GND, do you see any problem with that?
Best Regards,
d.
Hi,
Could you configure your sensor format to fmt:SRGGB10_1X10/1920x1080 and run the below pipeline?
gst-launch-1.0 v4l2src device=/dev/video-imx477-cam0 io-mode=5 ! queue leaky=2 ! \
video/x-bayer, width=1920, height=1080, framerate=30/1, format=rggb10…
Part Number: SK-AM68
Tool/software:
hi,
in k3-am68-sk-base-board.dts, the GPIO0_48 has been configed,
rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default { pinctrl-single,pins = < J721S2_IOPAD(0x0a8, PIN_INPUT, 7) /* (U24) MCASP0_AXR14.GPIO0_42…
Part Number: SK-AM68 Other Parts Discussed in Thread: AM68 Tool/software: we have recently purchased an evaluation board for the AM68 processor series, but unfortunately, the Gerber files were not included with design files. I am reaching out to see if…
Part Number: SK-AM68 Other Parts Discussed in Thread: AM68 Tool/software: we 've recently purchased an evaluation board for the AM68 processor series, but unfortunately, the Gerber files were not included with the board. I am reaching out to see if anyone…
Part Number: SK-AM68 Other Parts Discussed in Thread: AM68A Tool/software: Hi,
From this link, https://github.com/TexasInstruments/edgeai-tensorlab/tree/main/edgeai-modelmaker
Step 4: Prepare your own dataset with your own images and object types (Data…
Part Number: SK-AM68 Other Parts Discussed in Thread: AM68A , Tool/software: I used this command to train and compile by Model Maker,
./run_modelmaker.sh AM68A config_obj_detection_x.yaml
i want to change the trainning and compilation parameters
e.g.
Detection…
Part Number: SK-AM68 Tool/software: Hi!
Please help me understand programming of CPLD. Card has J14 connector mentioned for that purpose but not mentioned the source file or programming source. Please tell me how to program the CPLD used in the card…