Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 53 results View by: Thread Post Sort by
    Answered

  • RE: SN65DSI86EVM: Verify that the schematic is supported

    Resolved
    Hi, For the occasional flickering when the projector is first turned on, are you following the power-on sequence as shown in section 8.4.2 of the DSI86 datasheet, In particular, this part of the sequence? For the sleep mode, are you putting the DSI86…
    • Answered

  • SN65DSI86EVM: how to configure SN65DSI86 EVM without external I2C

    Resolved
    Part Number: SN65DSI86EVM Other Parts Discussed in Thread: SN65DSI86 Tool/software: Hi team, I don't find any GUI about SN65DSI86 EVM. So h ow to configure SN65DSI86 EVM? I checked the guide and found that it can be configured by external I2C but if…
    • Resolved
    • Answered

  • SN65DSI86EVM: Design files request

    Resolved
    Part Number: SN65DSI86EVM Tool/software: Hello, I would like to request the design files, including gerber, orcad .DSN file and the .brd file Jerry
    • Resolved

  • SN65DSI86EVM: Design Files

    TI Thinks Resolved
    Part Number: SN65DSI86EVM Hello, I would like to request the design files, including gerber, layout and PDF files. Thanks Raphael
    • Answered

  • SN65DSI86EVM: SN65DSI86EVM: Design Files + Diff Pair Lengths

    Resolved
    Part Number: SN65DSI86EVM Hi TI, I would like to request the design and layout files for the development board. Really my main interest is to determine if the DSI input lanes need to have matching lengths amongst themselves, And also if ML Displayport…
    • Resolved

  • RE: SN65DSI86EVM: problem working with IMX8MP

    By the looks of it, there is an issue with the lie time of your device. Have you used the DSI86 register calculator spreadsheet. The spreadsheet can be found in the E2E thread: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/945404…

  • SN65DSI86EVM: Looking for a simple off-the-shelf way to test this chip with a DSI source

    TI Thinks Resolved
    Part Number: SN65DSI86EVM Other Parts Discussed in Thread: SN65DSI86 Hello, I am working on evaluating the capabilities of the SN65DSI86 chip using your eval board. I am able to program the chip over i2c to display its color bar on a display, but now I…
    • Answered

  • SN65DSI86EVM: Output Color Bar Pattern without DSI connection

    Resolved
    Part Number: SN65DSI86EVM Other Parts Discussed in Thread: SN65DSI86 , TEST2 I'm trying to use the SN65DSI86EVM to do a color bar test on a BenQ GW2480 monitor connected to the development kit via a DisplayPort cable. I have tried to reference several…
    • Resolved
    • Answered

  • SN65DSI86EVM: Display Bridge Evaluation Board usage problem

    Resolved
    Part Number: SN65DSI86EVM Other Parts Discussed in Thread: SN65DSI86 Hello, I am trying to use the SN65DSI86EVM MIPI to eDP bridge to connect my board on Debian Linux with the NXP i.MX8MP processor to a display with Display Port. I installed the necessary…
    • Resolved

  • RE: SN65DSI86EVM: DP panel not getting video frames

    Hey Jigar, are you able to probe the DSI inputs? This is again most likely a timing issue, and I now want to make sure that the Hsync and Vsync are correct. Also if you arent already try using REFCLK, as this will clean up the clock signal and help eliminate…

Didn't find what you are looking for? Post a new question.