Part Number: SN65HVD1782 Other Parts Discussed in Thread: TMDSDOCK28379D , THVD2450 I have a 3.3V RS-485 application where we are using through hole components to quickly protoype a design. The SN65HVD1782P is rated for 3.15 to 5.5V. Would I have an issue…
Part Number: SN65HVD1782 Other Parts Discussed in Thread: DRV5055 1.TPS70950DBVR The output current does not meet the requirement:50mA ≤ l ≤ 100mA.Can LP2981A-50DBVR meet the requirements?
2.SN65HVD1782 The pin sequence is not satisfied.Does TCAN1044AVDRQ1…
Part Number: SN65HVD1782 Tool/software: HI team,
I plan to use a DCDC which output 5.2V to supply the SN65HVD1782, and also the ripple could be 100mVpp
Is it okay to use this DCDC to supply RS485 VCC? The datasheet only says VCC range 3.15V to 5.5V…
Part Number: SN65HVD1782 Other Parts Discussed in Thread: THVD2410 , THVD1400 Tool/software: Hi team,
i am checking the Vod setting of RS485 on different device.
i see the TIA/EIA standard have demand on Vod on 1.5V min at least. but i am seeing the…
Part Number: SN65HVD1782 Tool/software: I had a risk concern for purple plague corrosion come up for SN65HVD1782QDRQ1 and other automotive ICs. The Material declaration for these parts includes the use of Au wire bonds and die metallization materials…
Part Number: SN65HVD1782-Q1 Hi, We are performing worst case analysis. There are some doubts regarding the SN65HVD1782-Q1 specifications. 1. The levels VOD, VOC(SS) is marked in the below diagram as per our understanding. Is our understanding correct…
Part Number: SN65HVD1782 Hi,
Good Day.
Can you provide the TYP value of the propagation delay?
The datasheet only gives the MAX value.
Can you provide lot test data of the propagation delay of SN65HVD1782?
We need to know the TYP value and the…
Part Number: SN65HVD1782-Q1 Hello,
I had a followup question:
I see the maximum allowable part height in the drawing, but not a reference for the minimum. As has come up in our other vendor conversations, if TI can provide any information about the…
Part Number: SN65HVD1782-Q1 Hello：
The customer is currently using a TI chip SN65HVD1782QDRQ1, which fails after power on. They use two chips to convert clock signal CLK and data signal SIMO of SPI signal into differential signal output. The schematic…
