• SN65HVD231: spec

  

  Denny Huang

  TI Thinks Resolved

  Part Number: SN65HVD231 Dear team There is currently a project that uses TI CAN transceiver SN65HVD231, but the customer requires it to support CAN 2.0B 29bit. I confirm that the MCU currently used supports it, but is it also possible to support CAN transceivers…

  • over 3 years ago
  • Interface
  • Interface forum

• RE: SN65HVD234: Paralleling 485 and CAN

  

  Michael Ikwuyum

  Hi Chuck, Please help see SN65HVD231 with low power and data side being disconnected, or our newer device TCAN3414, thanks Best Regards, Michael.

  • 21 days ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: Allowable voltage on CANH and CANL when part is not powered

  

  Barney

  Resolved

  Part Number: SN65HVD231 Other Parts Discussed in Thread: SN65HVD230 , SN65HVD230Q-Q1 , , SN65HVDA100-Q1 What is the maximum allowable or safe voltage on CANH (pin 7) and CANL (pin 6) when the part is not powered (Vcc = 0V) for part SN65HVD230 or part SN65HVD231…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: Appropriate TVS Diode

  

  Guilherme Escuissato

  Resolved

  Part Number: SN65HVD231 Other Parts Discussed in Thread: SN65HVD1040A-Q1 I'm struggling to find a TVS Diode for the SN65HVD231 because the maximum voltage at its terminal is much lower than on other ICs! Look at the Absolute Maximum Ratings of the…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: Back to back CAN transceivers for one way communication?

  

  Julian Lewarne

  Resolved

  Part Number: SN65HVD231 Hi, my question is can two CANBUSs be connected together so that messages on one 'bridge' over to the other bus but messages from that side do not go back? Connect two transceivers with only the Tx and Rx together but leave…

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum

• SN65HVD231: ISO compliant test of SN65HVD231D & SN65HVD231Q-Q1

  

  Ben Kuo

  TI Thinks Resolved

  Part Number: SN65HVD231 Dear team, May I double confirm below item with you? Thanks. Does our SN65HVD231D & SN65HVD231Q-Q1 can both compatible with ISO11898(1-5) and ISO16845? Ben

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: Can powered SN65HVD231 drive VCC of unpowered SN65HVD231?

  

  Nick Denniston

  Resolved

  Part Number: SN65HVD231 I have two separate boards, each with an SN65HVD231 transceiver, that can communicate with each other successfully. In a previous version of the design, both boards were powered from the same external +12V supply and generated…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: IBIS model

  

  Elisha Tarroza71

  Resolved

  Part Number: SN65HVD231 Other Parts Discussed in Thread: SN65HVD230 Hello, We're looking for IBIS model of SN65HVD231, but it doesn't seem to be available. SN65HVD230 is in the same datasheet and have the same pinouts, can its IBIS model be used…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD231: Higher Temp. and same function

  

  Kuan Wei Chen (Kevin Chen)

  Resolved

  Part Number: SN65HVD231 Dear Team, SN65HVD231DR only for 85dC. Do we have higher temp. device? I am not sure this one is suitable or not. It seems is old device. BR Kevin

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum

• SN65HVD231: VREF pin

  

  Kai Hsiao

  TI Thinks Resolved

  Part Number: SN65HVD231 Hi Sir I saw SN65HVD231 have Vref pin ,but TI the latest TCAN33x series this pin is NC not VREF May I know the reason? Can TCAN33x replace SN65HVD231 directly ? Thanks

  • over 6 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.