Part Number: SN65HVD256SN65HVD256DR can h and can l have noise when the environment temperature decrease 5℃ or less ?
the CAN communication link (waveform captured by a logic analyzer) shows noise roughly every 6–7 seconds.
what may cause that?
Part Number: SN65HVD256 Hi,
CAN signal waveform abnormality.
Schematic diagram:
-----------
Test points: SN65HVD256DR-6P Test GND: SN65HVD256DR-8P Test conditions: DC high voltage: 320V DC low voltage: 18V Compressor operation
Note: There…
Part Number: SN65HVD256 Other Parts Discussed in Thread: SN65HVD230 , TCAN330 We've been using the SN65HVD256D in our 5 volt CAN bus designs, but now need a 3.3 CAN bus transceiver. When looking at potential replacements:
https://www.ti.com/interface…
Part Number: SN65HVD256 Dear Specialists,
My customer is considering SN65HVD256 and has a question.
I would be grateful if you could advise.
---
(Question 1) The undervoltage detection level (UVvcc: Undervoltage detection on VCC for VCC protected…
Part Number: SN65HVD256 Other Parts Discussed in Thread: TCAN1042V-Q1 Hello Guys,
Good day.
Just like to confirm if SN65HVD256 is half/full duplex operation?
TCAN1042V-Q1 seems to be pinout and function compatible with SN65HVD256, do you know if…
Part Number: SN65HVD256 Other Parts Discussed in Thread: TCAN1051HV SN65HVD256 was found very high failure in commercial air conditioner PCBA from after sale. What is the main reason to cause this and it's not easy to recurrent this failure in lab.
Part Number: SN65HVD256 Other Parts Discussed in Thread: TCAN337 , TCAN330 , SN65HVD234 , SN65HVD230 Hello,
Our customer use the SN65HVD256 with the VRXD as 3.3V.
The customer are considering a new project. They will use the supply voltage as only…
Part Number: SN65HVD256 Other Parts Discussed in Thread: SN65HVD234-Q1 , TCAN332 , TCAN1051 hi,
I want to know ,if i use the sn65hvd256 in 3.3v system, could i connect the Vcc and Vrxd all to 3.3v power supply? or do i need connect two power supply…