Part Number: SN65HVD257 Other Parts Discussed in Thread: TCAN1044A-Q1 , TCAN1044-Q1 Tool/software: Hi
We are using ic : SN65HVD257DR in our design .
We need IBIS model for signal integrity .
So please help me find this. I cant find it in web site.
Regards…
I recently went through the material on redundant CAN topology provided by your team, accessible through the following link: [Link: https://www.ti.com/lit/ug/sllu172/sllu172.pdf?ts=1713461095781&ref_url=https%253A%252F%252Fwww.google.com%252F]. However…
Part Number: SN65HVD257 Hi,
I require a CAN transceiver part, which should have safety functional features.
Whether SN65HVD257DR is functional safety capable?
Thanks.
Sneha
Part Number: SN65HVD257
Hi,
I am using SN65HVD657 IC in my design like a bus. 150 nodes connected in the bus. I want to calculate the power consumption. So if any faut occur means datasheet showing 180mA is the maximum fault current. Whether this current…
Part Number: SN65HVD257 Hi Team,
We would like to ask help regarding the customer's inquiry below.
When two Transceivers are setup in redundant configuration, both are enabled no termination on either bus is present. If I transmit data on TXDprime…
Part Number: SN65HVD257 Other Parts Discussed in Thread: SN65HVD233-Q1 , TCAN4550-Q1 , TCAN1145-Q1 , TCAN1046-Q1 , TCAN1043-Q1 Hi,
I am using SN65HVD257 for functional safety applications.
1.I need another CAN transceiver with Functional Safety With Redundant…
Part Number: SN65HVD257 Hi,
Customer got below waveform for SN65HVD275 in their system. Would it be caused by DTO time? please give a comment.
Thanks a lot.
Part Number: SN65HVD257 Hi,
I am going to use SN65HVD257DR for one of the application.
I am bit concerned about the ICC which is 130-180mA in Driving dominant-Bus fault condition.
ambient temperature is 50degree.
I am calculating stress analysis at this…
Other Parts Discussed in Thread: SN65HVD257
Dear all,
In a safety application we are using SN65HVD257 CAN drivers in a Redundant Physical Layer CAN Network Topology as indicated in the relevant data sheet.
In case of two line cut failures on…
Other Parts Discussed in Thread: SN65HVD257 Hello
I would like to use sn65hvd257 powered by 5v , but my MCU is powered by 3.3v ; I could not understand that from the datasheet , what is minimum volt for logic high and low for the TXD ?
Thanks
