• SN65HVS882: SN65HVS882

  

  Sinchana K.L.

  TI Thinks Resolved

  Part Number: SN65HVS882 Hi, I'm designing a digital input card for which I've selected SN65HVS882 Digital Input Serializer that suits my purpose. Kindly let me know how do I go with the PSpice simulation using this model as I'm not able to find SPICE…

  • over 1 year ago
  • Switches & multiplexers
  • Switches & multiplexers forum
Answered

• SN65HVS882: When all 8 digital inputs are active (high level=24V) the SPI reads 00

  

  Nicola Battisti

  Resolved

  Part Number: SN65HVS882 Hi there, we have designed a new board that has to read 48 digital inputs. The board is 24V power supply, also inputs can be 0V or 24V. We connected 6 devices SN65HVS882PWPRG4 together using SPI interface in chain mode. All works…

  • Resolved

  • over 1 year ago
  • Interface
  • Interface forum

• SN65HVS882: Cascaded configuration

  

  Renan Santos Adriano

  TI Thinks Resolved

  Part Number: SN65HVS882 Hello Team, My customer would like to know what is the maximum SN65HVS882 that can be cascaded? Basically, he is trying to read 128 relays output status (24V for ON and GND/open for OFF) and its voltage level (24V DC) and looking…

  • over 2 years ago
  • Interface
  • Interface forum

• SN65HVS882: Does this IC need Power cycle?

  

  Harsh b

  TI Thinks Resolved

  Part Number: SN65HVS882 Dear team, We are using this IC to read data from sensors. we have made testjig where we are feeding 8 digital inputs which is of 24V level to SERIALIZER and we are reading it from SOC. Right now we are only able to read it first…

  • over 2 years ago
  • Interface
  • Interface forum

• SN65HVS882: what is spi clk supported by this device

  

  Harsh b

  TI Thinks Resolved

  Part Number: SN65HVS882 what is spi clk supported by this device and what is DC in below figure??

  • over 2 years ago
  • Interface
  • Interface forum
Answered

• SN65HVS882: Why do we need 1.2k resistor in series?

  

  Harsh b

  Resolved

  Part Number: SN65HVS882 why do we need to use the 1.2K resistors in series with input? what type of resistor do we need to use? my IP level is 24V

  • Resolved

  • over 2 years ago
  • Interface
  • Interface forum

• SN65HVS882: 20 mA current draw on input

  

  Robert Adsett1

  TI Thinks Resolved

  Part Number: SN65HVS882 I've an odd situation where the input seems to be drawing nearly 20mA (~22V across a 1k2). I've., at least temporarily, run out of things to check and am wondering if anyone else has seen something like this. I have ~23V5 at the…

  • over 2 years ago
  • Interface
  • Interface forum

• Linux/SN65HVS882: 4.1 kernel driver and DTS file support

  

  Ashok kusa

  TI Thinks Resolved

  Part Number: SN65HVS882 Tool/software: Linux Dear Team, Can you please share me latest driver & DTS of kernel version 4.1 below part.

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• SN65HVS882: Can the thermal pad this chip be connected to ground?

  

  Daniel Rechichi

  Resolved

  Part Number: SN65HVS882 Hi all, Can the thermal pad on the SN65HVS882 be connected to ground? The PowerPAD drawing says to connect to the appropriate copper plane shown in the electrical schematic for the device. However, the thermal pad isn't mentioned…

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• SN65HVS882: Input field range of 36-72VDC

  

  Nir Bohadana

  Resolved

  Part Number: SN65HVS882 Other Parts Discussed in Thread: ISO1212 , ISO1211 , I'm trying to integrate the part in my Digital Input module but our digital input fields values are within range of 36-72V, nominal is 60V fo 'ON' value. what is the…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.