Part Number: SN65LVDS101 Hi Team,
a customer is looking for an IC that takes MADI signal of 0.3V to 0.6mV amplitude.. with mean value of 0V
and convert it to LVPCEL of 800mV.
could you recommend a cost efficient solution?
BR, Stefan
Part Number: SN65LVDS101 I am using the sllc125a.ibs model for simulating the SN65LVDS101, and am seeing unexpected behavior in the signals. The positive and negative signals both seem to have skewed duty cycles, so that high pulses are very wide and low…
Hi,
SN65LVDS101 has teh LVPECL output you can refer to section 6 Device Options for a detailed breakdown. All devices will need some power, diagram is a simplified reference drawing.
Hi Amy,
The ADC3683 will soon be available in the SEP (Space Enhanced Plastic) grade and we are looking at it for space use. I don't think the CDCxxx are valid options for space.
But if I understand well, you are saying I could drive the ADC clokc…
Other Parts Discussed in Thread: SN65LVDS101 , SN65LVP20 Is anything reasonable although the spec. of VOH/VOL differs between SN65LVDS101 and SN65LVP20?
Moreover, can it use combining SN65LVDS101 and SN65LVP20?
Thank you for your consideration.
Part Number: SN65LVEP11 Other Parts Discussed in Thread: SN65LVDS101 , , DS15BR401 Hi all,
I have a customer that is wondering if the following parts will be available in longterm
SN65LVDS101
SN65LVEP11
DS15BR401 (they prefer DS15BR401TSQ due to better…
Hello,
The clocking scheme you described should be fine. The requirement is that REFCLK on the DS90LV18 has to be the same (within 5%) as the TCLK on the other (transmit) side. Having TCLK and REFCLK on both sides the same should be fine.
Regarding the…