Part Number: SN65LVDS104 Hi team,
The customer needs to get the jitter time for SN65LVDS104. His clock frequency is 100MHZ.
His jitter requirement is 3 ps RMS. Figure 9 of the datasheet shows the jitter exceed 3ps when the clock frequency is 100MHZ…
Part Number: SN65LVDS104 Hello,
Although it is obviously not best practice, do you see any major problem with having an idle/non-changing input (IN+ stays high, while IN- stays low) while the chip is in an un-powered state? This situation might be un…
Part Number: SN65LVDS104 Other Parts Discussed in Thread: DS90LV012A Hello Team,
is it possible to use the SN65LVDS104 as a clockdistribution IC for a 25MHz reference clock with two differential and one single ended output where the SE output is connected…
Part Number: SN65LVDS104 Hello E2E,
Can you pull the EN pins (pins 1, 2, 3, 8) high with a 10k resistor to 3.3V? It seems fine by me but wanted to double check.
Thanks!
Russell
Other Parts Discussed in Thread: DS15MB200 , SN65LVDS104 hello,
I would like to have the schematic diagram for the two data DEMO boards of the DS15mb200 and sn65lvds104。
Hi,
We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.
Regards,
Emrys
The subject part includes a Fail-Safe feature. Page 14 of the datasheet (just above Figure 25) says, “The fail-safe feature uses an AND gate with input voltage thresholds at about 2.3 V to detect this condition and force the output to a high-level regardless…
Other Parts Discussed in Thread: SN65LVDS104 Hi,
Customer would like to know the additive jitter for SN65LVDS104.
Would you provide the information ?
Best Regards,
Kato
