• 

  Oscar Gomez Fuente

  • 2 months ago
  • Logic
  • Logic forum

  I need a low-power single buffer with open-drain output and enable pin.

  • Resolved

  number is perfect, but I need enable pin functionality: SN74AUP1G07 Low-Power Single Buffer/Driver
• 

  Max Guan

  • 4 months ago
  • Logic
  • Logic forum

  SN74AUP1G07: SN74AUP1G07 package confirm

  • Resolved

  Part Number: SN74AUP1G07 Hi team, My customer is using competitor 74AUP1G07GF and we noticed
• 

  Yuto Sakai

  • over 1 year ago
  • Logic
  • Logic forum

  SN74AUP1G07: Continuous current through VCC or GND

  TI Thinks Resolved

  Part Number: SN74AUP1G07 Hi, I have a question about the absolute maximum rating of Io listed in the data sheet P.4. In "Continuous output current", the max value is specified as ±20mA. In "Continuous current through VCC or GND"...
• 

  Jerry Chu

  • over 1 year ago
  • Logic
  • Logic forum

  SN74AUP1G07: Pull Up Voltage

  • Resolved

  Part Number: SN74AUP1G07 Hi Expert, Want to double check it, If the VCC is 1.8V, output pull high
• 

  Clemens Ladisch

  • 3 months ago
  • Logic
  • Logic forum

  RE: SN74AUP2G07: can i pull-up the OD output of SN74AUP2G07 through Kohm to other voltage level > VCC of this part ?

  The SN74AUP1G07 and SN74AUP3G07 datasheets allow 3.6 V, as expected for an open-drain output. Apparently, the entry in the SN74AUP2G07 datasheet is just wrong. Your design is OK.
• 

  Clemens Ladisch

  • 4 months ago
  • Logic
  • Logic forum

  RE: SN74AUP1G32: but for open drain output type

  There is no voltage-translating gate (or any OR gate) with open-drain outputs. You could use the SN74AUP1T32 for the 1.8V-to-3.3V translation and the OR gate, and then add an open-drain buffer like the SN74AUP1G07.
• 

  Jerry Wright

  • over 1 year ago
  • Logic
  • Logic forum

  SN74LVC1G74: SN74LVC1G74: SN74LVC1G74DQE Thermal Information

  Part Number: SN74LVC1G74 I submitted 7 service requests that were combined into Case Number CS0008361. The response provided links to the service requests for the proposed resolutions. When I go to the response links see ticsc.service-now.com/csm , I...
• 

  Emrys Maier

  • over 1 year ago
  • Logic
  • Logic forum

  RE: SN74LVC1G07: Output leakage current

  Hey Peter, The answer you linked is still valid. Additionally, it's unlikely that the SN74LVC1G07 will be recharacterized due to the cost involved and the age of the part. If you're looking for a 3.3V part with a lower output leakage in the...
• 

  HsinHung Lee

  • over 3 years ago
  • Logic
  • Logic forum

  SN74AUP1G07 for I2C clock buffer

  • Resolved

  Hi, Can I use the SN74AUP1G07 for I2C clock bus with 100KHz? Stanley
• 

  Nate Lee

  • over 3 years ago
  • Logic
  • Logic forum

  [SN74AUP1G07] Inquiry of Internal Block Diagram

  Hi Team, I'd like to know internal block diagram of SN74AUP1G07. Can you share this or explain operation thing? Also, in D/S P11, what is meaning of "Bus Contention" ? for this reason, When the Vcc is applied to 3.3V, there is shoot...

Didn't find what you are looking for? Post a new question.

• Ask a new question