Part Number: SN74AVC4T245 Other Parts Discussed in Thread: TXU0204 For SN74AVC4T245RSVR, VCCB is powered by 3.3V, and VCCA is suitable for 1.2V power supply. Can the I/O on the VCCB side withstand 3.8V voltage? The approximate application block diagram…
Part Number: SN74AVC4T245 Other Parts Discussed in Thread: SN74LXC8T245 , SN74LXC2T45 Do you have a similar 4bit buffer with DIR control, Enable and VCCB 5V tolerant?
Part Number: SN74AVC4T245 Other Parts Discussed in Thread: SN74AXC4T245 , Hi we have a PCBA that is using the 74AVC4T245PW to comunicate via UART a Microcontroler STM32L4R5 and an WirlessModule from Telit.
Microcontroller is 3.3V and Wireles Module…
Part Number: SN74AVC4T245 Tool/software: Hi
I am using SN74AVC4T245 Translation transceiver. can I use 1A1 and 1A2, B to A direction and 2A1, 2A2 A to B direction simultaneously. is it possible without effecting the dataflow?
Regards
P Prasanth
Part Number: SN74AVC4T245 Tool/software: Hi team,
Below is the transimition waveform. The blue curve is input, the red curve is output. But you can find there is jitter on output. Could you please explain the waveform? Is it caused by the slow input…
Part Number: SN74AVC4T245-Q1 Other Parts Discussed in Thread: SN74AVC8T245-Q1 Hi team,
I was comparing few voltage translators for 4-bits and 8-bits dual-supply bus transceivers. Like MPN: 74AVC4T245QPWRQ1 and SN74AVC8T245QPWRQ1, here though i understand…
Part Number: SN74AVC4T245 Hi Team
Regarding the Tj specification of SN74AVC4T245RSVR: The datasheet only specifies Ta = 85 °C and does not indicate Tj. The customer would like to confirm whether Tj can be higher than 105 °C.
Please provide the Tj…
Part Number: SN74AVC4T245
Tool/software:
Hi Teams,
We find there are step waveform on slaver side, but there is normal waveform on master side.
Please refer schematic and waveform as following, thanks.
before level shift :
after level shift…
Part Number: SN74AVC4T245 Tool/software: Dear TI Team,
I was referring the SN74AVC4T245DYYR datasheet to create the symbol and footprint, but I found an error in datasheet regarding the thermal pad. In the section: Pin Configuration and Functions ,…
Part Number: SN74AVC4T245-Q1 Other Parts Discussed in Thread: TXU0104-Q1 Tool/software:
Hi ALL,
when i am testing the current of VCCA,i found that VCCA has 2mA current, and when i conect 2A2 to gnd, zhe total current of VCCA decrease to 0.2mA.
The…
