• SN74AVC4T774: SN74AVC4T774 SCLK Signal Integrity

  

  Bo Ren

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Tool/software: In our application, SN74AVC4T774 is used as SPI buffer. The rising edge of SPI SCLK has a back-hook at the input of SN74AVC4T774, and the voltage is around 1.5V. The Min of V IH is 2V in SN74AVC4T774 datasheet…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AVC4T774: SN74AVC4T774

  

  Dante Fasano

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Hello, Does anyone know if TI will pre-sort chips before shipping? For example, we are buying SN74AVC4T774 for use in a product and we want parts with the faster propagation delays. If we get parts that are on the slower…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AVC4T774: SN74AVC4T774 vs SN74AXC4T774 Ioz leakage current characteristics

  

  Nicolas PERRIN

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Other Parts Discussed in Thread: SN74AXC4T774 Tool/software: Dear TI support team, Could you provide me SN74AVC4T774 and SN74AXC4T774 Ioz polarity and value depending on junction temperature ? We found an issue on our design…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AVC4T774: VCCB voltage level and B ports voltage levels are different

  

  Anand KN

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Tool/software: Hi Support team, We are using SN74AVC4T774PWR level translator in our design. 1. VCCB is connected to 3.6V but B port interfaces are connected to 3.3V UART lines. 2. VCCA is connected to 1.8V and A ports…

  • 1 month ago
  • Logic
  • Logic forum

• SN74AVC4T774-Q1: Vih and Vil Logic levels Questions

  

  Andrew Jones

  Answer Suggested

  Part Number: SN74AVC4T774-Q1 Other Parts Discussed in Thread: SN74AVC4T774 , SN74AXC4T774-Q1 , SN74AXC4T774 Tool/software: Hi, I believe i may have found an error in the datasheet for SN74AVC4T774-Q1. In this, in the sections highlighted, it specifies…

  • 2 months ago
  • Logic
  • Logic forum

• SN74AVC4T774: 4V Bus Translator

  

  Edmundo de la Puente

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Tool/software: I'm looking for a bus translator similar to the SN74AVC4T774 but with 4V level support. The 774 supports up to 3.6V on the I/O pins.

  • 8 months ago
  • Logic
  • Logic forum
Answered

• SN74AVC4T774: Overvoltage fault behavior

  

  Ed Hann

  Resolved

  Part Number: SN74AVC4T774 Other Parts Discussed in Thread: LM63615-Q1 , ISO6520 Tool/software: Using the 74AVC4T774 with 3V on side A and 1.8V on side B. The side B 1.8V power is from a buck converter with 12V input. This question is about the behavior…

  • Resolved

  • 7 months ago
  • Interface
  • Interface forum
Answered

• SN74AVC4T774: Partial Power

  

  Richard Katz

  Resolved

  Part Number: SN74AVC4T774 Tool/software: Hi, I am diagnosing a problem in a board I was given. And a question is, how does this part behave with partial power? In particular, the A side is off (no VCCA), the A inputs are not driven, OE* is grounded…

  • Resolved

  • 11 months ago
  • Logic
  • Logic forum
Answered

• SN74AVC4T774: SN74AVC4T774

  

  Rakshitha Y S

  Resolved

  Part Number: SN74AVC4T774 Other Parts Discussed in Thread: TXU0304 , SN74AXC4T774 Hi Team, We are using "SN74AVC4T774PWR" level translator in our project. We want our circuit should be always enable, so we connected #OE pin to ground through 10K ohm…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum

• SN74AVC4T774: SN74LVC8T245 - Output state verification

  

  Gopi Narayanan

  TI Thinks Resolved

  Part Number: SN74AVC4T774 Tool/software: Hi Team, Good day! I am using SN74AVC4T774RSVR part one of my test card and seeking clarification in the design, -> VCCA is having 3V3 default and Part A inputs is default Pull-down (all inputs are connected…

  • 11 months ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.