• SN74AXC1T45: SN74AXC Power Sequencing

  

  dtluigi

  Part Number: SN74AXC1T45 In my application, by powering VCCB before VCCA with two separate power supplies, is it possible that VCCA's net is charged by VCCB before its dedicated power supply starts?

  • 21 days ago
  • Logic
  • Logic forum

• SN74AXC1T45: Will SN74AXC1T45 output 1.44 V at 170 MHz when driven with 1.8 V 170 MHz, under normal loading?

  

  Naveena R

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Other Parts Discussed in Thread: SN74AVC1T45 Hi All, My input to the SN74AXC1T45 will be (170Mhz;1.8V) Sqaure signal single ended. I am expecting a 170Mhz;1.44V single ended signal at the out. Kindly let me know the possibilities…

  • 6 months ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum

• SN74AXC1T45: Recommended stencil thickness, pitch and rework method

  

  gusti ngurah putu tristan mukti

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Hi can you give me the Recomended stencil thickness , aperture / pitch and the recomended temperature for Re-flow ?

  • 4 months ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum
Answered

• SN74AXC1T45: SN74AXC1T45

  

  Rahul M

  Resolved

  Part Number: SN74AXC1T45 Other Parts Discussed in Thread: SN74AUC1G17 , LMK00804B Tool/software: Hi , i have clock being generated from my FPGA for the DUT. The FPGA generates a 2.5V (LVCMOS) @ 320MHz , i need to voltage translate it to 1.2V ( LVCMOS…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AXC1T45-Q1: SN74AXC1T45QDCKRQ1: Device top marking and pin 1 indicator position

  

  Wanying Zhang

  TI Thinks Resolved

  Part Number: SN74AXC1T45-Q1 Hi Team Where does PIN 1 indicator locates on SN74AXC1T45QDCKRQ1? My customer couldn't find it on the datasheet and device.

  • 2 months ago
  • Logic
  • Logic forum

• SN74AXC1T45: Can SN74AXC1T45DTQR realize Audio HDA Level shifter 1.8 to 3.3V / 6 Bit?

  

  Sean Liao (Yu-Sheng)

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Other Parts Discussed in Thread: LSF0108 , SN74AVC4T245 Hi sir, Customer wants to use 6pcs of SN74AXC1T45DTQR to realize Audio HDA Level shifter 1.8 to 3.3V / 6 Bit. Is it workable? Or do you have other suggestion? I ever…

  • 4 months ago
  • Interface
  • Interface forum

• SN74AXC1T45: SN74AXC1T45 can be used for clock @ 320Mhz when translating from 2.5V to 1.2V ?

  

  Rahul M

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Tool/software: Hi , i have clock being generated from my FPGA for the DUT. The FPGA generates a 2.5V (LVCMOS) @ 320MHz , i need to voltage translate it to 1.2V ( LVCMOS ) @ 320MHz for the DUT. Can SN74AXC1T45 be suitable for this…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AXC1T45: SN74AXC1T45 DIR PIN

  

  Rajat Singh

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Hi Team, Please have a look into the schematic implemematation of buffer. DIR pin should be directly connected to VCC or With Pull-up? for A to B direction DIR PIN should be directly connected to GND or with resistor…

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74AXC1T45-Q1: Duty cycle of the output waveform

  

  Konoha Shimizu

  Resolved

  Part Number: SN74AXC1T45-Q1 Other Parts Discussed in Thread: SN74AXC1T45 Tool/software: Hello Team, We are using the SN74AXC1T45QDCKRQ1. According to the datasheet, VCCA is guaranteed to operate from 0.65V, but when operated at 0.65V, a waveform with…

  • Resolved

  • over 1 year ago
  • Clock & timing
  • Clock & timing forum

• SN74AXC1T45: Convert .cir to .olb file for PSpice simulation

  

  Azlan Hamzah

  TI Thinks Resolved

  Part Number: SN74AXC1T45 Tool/software: Hello.. I would like to check with regarding TI PSpice. I'm looking into MPN:SN74AXC1T45 simulation model but not available in TI website. But I managed to find .cir file for this MPN. Do you know how to convert…

  • over 1 year ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.