Thanks for your support.
In PDN-3M suggested us pull ACT high, and don't need connect MON3/MON4/MON5.
Since ACT is high by default, sampling will begin before I2C is configured, and unused monitoring pins will overflow the threshold.
Could i use…
FAQ: Logic and Voltage Translation > Voltage Translators >> Current FAQ
Here are the voltage level translation device recommendations for various industry standard interfaces:
Interface
Recommended Device
3.6V Maximum
5.5V Maximum…
Part Number: SN74AUC34 Other Parts Discussed in Thread: SN74AUC04 , SN74AUC08 , SN74AXC1T45 , SN74AUC2G240 , LMK1C1103 , SN74LVC257A-Q1 , SN74ALVC04 Tool/software: Hi,
My design uses a mix of LVCMOS components. I have chosen these components for a reason…
SN74AHC1G09 is a different IC form SN74AXC1T45. The output type is also different between two ICs. The leakage current in SN74AXC1T45 datasheet is defined in input leakage. I want to know SN74AHC1G09 open drain output ILKG SPEC while Q1 is off. Thanks…
Part Number: SN74AXC2T45 Other Parts Discussed in Thread: SN74AXC1T45 Hello experts,
I have two question about SN74AXCxT45.
1. Is it possible to apply same voltage for Vcca and Vccb?
In datasheet, there is description in below.
For example…
Part Number: SN74AUP1T34-Q1 Other Parts Discussed in Thread: 2N7001T , SN74AXC1T45 in datasheet, there is only introduction about the application of signal from low voltage to high voltage. please tell if it support the voltage reduction case.
Quickly find solutions to common questions about voltage translation (level shifter) devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… …
Auto-Bidirectional Level-Shifters
Fixed DIR / DIR…
