Part Number: SN74CBTLV3251 Hello all,
I want to use sn74cbtlv3251 mux in my new design.
I need that all of the unselected ports to be high z.
For example, if I set S0='0', S1='0', S2='0'. I want A = B1 and B2 to B8 to be disconnected or high impedance.…
When looking for a multiplexer to be implemented for hot-insertion (also known as hot-swapping) applications. It is important to make sure it has Ioff Circuitry and the Partial Power Down Mode feature. We also recommend to pick a multiplexer with a continuous…
Hallo Louie
Thanks. I worked.
I would like to have little more information .
what is the power dissipation of this IC(SN74CBTLV3251) ??
Thanks in advance
Viraj
Part Number: SN74CBTLV3251 Should the exposed thermal pad for SN74CBTLV3251 be connected to GND?
I'm assuming yes, but the datasheet does not explicitly specify and I've seen some odd devices that want it connected to VCC.
Regards,
Craig
Part Number: SN74CBTLV3251 Other Parts Discussed in Thread: CD74HC4067 , MUX506 , MUX36S16 Customer are looking at SN74CBTLV3251 but are asking for a 16 ch devise, do we have? Also, do we have with I2C/SPI control?
Requirements:
Digital, one bit in 8 bit…
Part Number: SN74CBTLV3251 Other Parts Discussed in Thread: ADS7042 , CD74HC4051 Hello,
I was looking at the datasheet for the SN74CBTLV3251, and it is not clear whether a signal of 1.8V will be high enough to be considered a HIGH.
My customer wants to…
Part Number: SN74CBTLV3251 Other Parts Discussed in Thread: SN74HC4851 , SN74LV4051A Hi Sir,
We are see the IDT 74CBTLV3251QG8 ESD level is >2000V per MIL-STD-883, Method 3015; >200V using machine model( C=200pF, R=0).
Our customer want to know what…
As far as I am aware, capacitive buttons can be read only by measuring their capacitance. This requires a direct connection between the measuring circuit and the sensor, so you should use analog multiplexers like the SN74CBTLV3251.
Your microcontroller…
