Part Number: SN74LV04A Other Parts Discussed in Thread: SN74LVC04A Hi,
Q1. I am currently considering using the SN74LV04A (LV-A). There is a similar model number SN74LVC04A (LVC). Could you tell me the difference in specs between these two model numbers…
Part Number: SN74LVC04A Hello team,
For Vcc, the abs max current will be input clamp current 50mA. Is that understanding correct ?
Vcc would be input 12V instantly at start up.
With the above situation, input voltage would be over abs max but customer…
Part Number: SN74LVC04A Hi team,
There is a spec, tsk(o), in SN74LVC04A datasheet. As my memory there is two kinds of output skew spec definition for logic device: one is channel to channel output skew, another one is the difference between low-high and…
Part Number: SN74LVC04A Other Parts Discussed in Thread: SN74LVC14A , SN74AHC14 Hi Team,
The customer needs to get the max VOH value and the min VOH value for SN74LVC04A SN74AHC14 and SN74LVC14A.
The customer's requirements are when VCC is 3.3V and IOH…
Other Parts Discussed in Thread: SN74LV04A , SN74LVC04A Please let me know about LVCMOS output inpedance(Zo) of SN74LV04A.
【Background and condition】
・SN74LVC04A using for clock driver(50MHz)
・Inpedance matching of this pattern is 40～50Ω
・Output…
Part Number: SN74LS04 Other Parts Discussed in Thread: SN74LVC04A , SN74LVC14A , SN74HCT14 , SN74HCT04 Hi,
I am using SN74LS04 for an on/off sensor detection, For some reason, my channel 1Y is not able to pull above 0.9V when my input 1A is 0V. If 1A is…
sn74lvc04a.pdf Hi Wade,
Can i load 64mA on each output(in the low state) so that the total current into the ground pin will be 256mA? Is there any limitation on the ground pin current(not given in data sheet)?
For example , if we take sn74lvc04a ,the recommended…
Other Parts Discussed in Thread: SN74LVC04A , SN74HC04 I have a PICAXE AXE027 FTDI cable and the Serial Data at 9600 BAUD I'm sending through the cable I think needs to be inverted to be compatible with the SpeakJet chip that needs to receive the data. …
