• SN74LVC1G00: Input overdrive

  

  neel mistry

  TI Thinks Resolved

  Part Number: SN74LVC1G00 Is there any concerns if I overdrive the input? For example, my NAND gate is connected to a 3.3V supply and the input is 5V.

  • 19 days ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G00: MAXIMUM recommended PULLUP resistor values for LVC logic INPUTS

  

  Robert Buono

  Resolved

  Part Number: SN74LVC1G00 Typically pullup resistor values for logic inputs are in the range of 4.7K ohm to 10K ohm. However, there are some situations where I would like to use a higher value. This is usually to save power, or when the driving device…

  • Resolved

  • 9 months ago
  • Logic
  • Logic forum

• SN74LVC1G00: SN74LVC1G00DCKR: Please provide the reflow profile graph

  

  Anusha G A

  Part Number: SN74LVC1G00 Please provide the maximum reflow temperature and the time associated with maximum reflow temperature(tp) for SN74LVC1G00DCKR. Please refer to the below image.

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G00: K3 vs K6 suffix

  

  ArTzy

  Resolved

  Part Number: SN74LVC1G00 Hi Experts, Good day! I have this concern from client asking about the difference between the two OPNs: SN74LVC1G00DCK3 and SN74LVC1G00DCK6. I couldn't find any information about these suffixes even the OPN from the datasheet.…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum

• SN74LVC1G00: Device is un-powered while inputs are still toggling. Is it safe to assume output in '0'?

  

  Eyal Lasko

  TI Thinks Resolved

  Part Number: SN74LVC1G00 Hi, VCC to the device is not guaranteed however inputs keep on toggling. Can it harm the device? Can I safely assume that the output is '0' when unpowered? (If not, in which device family can this be guaranteed) Tha…

  • over 1 year ago
  • Logic
  • Logic forum

• SN74LVC1G00: Power switching using NAND gate

  

  Eng Lih Khaw

  TI Thinks Resolved

  Part Number: SN74LVC1G00 Other Parts Discussed in Thread: SN74LVC1G14 , SN74LVC1G97 Hi, Customer of mine would like to use NAND gate (SN74LVC1G00DBVR) to do the switching of the 3.7V battery power and 5V USB power rail. As below Please advise if it's feasible…

  • over 2 years ago
  • Logic
  • Logic forum

• SN74LVC1G00: Input levels for VCC not in datasheet

  

  Sepeedah Zadeh

  TI Thinks Resolved

  Part Number: SN74LVC1G00 Hello team, My customer is using SN74LVC1G00DCKR with VCC at around 3.7V to 3.8V. In the Recommended Operating Conditions section, it does not show the VCC condition between 3.6V to 4.5V as shown below. I think we should be able…

  • over 2 years ago
  • Logic
  • Logic forum

• SN74LVC1G175: replacement with 1 or 2x of SN74LVC1G00 ?

  

  ana teomindy

  Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74LVC1G00 , Hi guys. Is it possible to replace SN74LVC1G175 with SN74LVC1G00 or a combination of 2x SN74LVC1G00 + maybe something else? We kinda poked it thru reset button on our dvr-recorder…

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• SN74HCS74: Clock edge issue

  

  tyrael cui

  Resolved

  Part Number: SN74HCS74 Other Parts Discussed in Thread: SN74LVC1G00 , SN74LVC1G132 Hi Logic Experts, I'm using the sn74HCS74 to control power on/off. Below is my schematic. The clock signal is drived by the output of the SN74LVC1G00。 Here is the…

  • Resolved

  • 2 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G00: SN74LVC1G00

  

  Sripriya Raghavendran

  Resolved

  Part Number: SN74LVC1G00 Does this part support a full power down mode? This part is too small to solder and test.

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.