Part Number: SN74LVC2G32-Q1 Hi all,
Can you tell me if the FIT rate shown in the thread below (0.5 FIT or 0.5 failure per 10^9 hours per device) is applicable to SN74LVC2G32-Q1? https://e2e.ti.com/support/logic/f/logic-forum/803625/sn74lvc1g38-fit-rate…
Part Number: SN74LVC2G32-Q1 Hi TI expert
I looked the datasheet and it was unmarked ADAS information,please tell me whether SN74LVC2G32QDCURQ1 can be used in ADAS application and ADAS products (QM/A/B/C/D) is QM?
Part Number: SN74LVC2G32 Hello,
My customer is considering to replace TOSHIBA TC7W32FU with SN74LVC2G32.
TC7W32FU specifies VOH min as 4.13V with -4mA, VCC=4.5V and Ta=-45-85C. On the other hand, SN74LVC2G32 specifies VOH min as 3.8V with -32mA, VCC=4…
Part Number: SN74LVC2G32 Hi E2E,
May I know what is the correct pinout for the YZP package of SN74LVC2G32. The pinout on page 3 is not in BGA pin numbering so it is quite confusing. Also, after checking the ultralibrarian file, the pinout is…
Part Number: SN74LVC2G32-EP Hi, Greetings. Our customer is looking for the rated junction temperature of SN74LVC2G32-EP however it is not available on the datasheet. We would appreciate if you could provide us this information. Looking forward to your response…
Part Number: SN74LVC2G32 Trying to understand Icc vs delta Icc spec. Can you explain with more detail. Is it this:
Icc is the static Iq when inputs are the same logic level
Delta Icc is the static Iq with inputs at different logic levels?
Build a two-bit counter with flip-flops. Reset it on power up or when it reaches the fourth state. Use an OR gate to create the logic-1 output from the 01 or 10 state.
The flip-flop and the AND gate need Schmitt-trigger inputs, so use SN74HCS74 and SN74LVC1G97…
Hi kate, Thank you for your kind support. I understood how to calculate power dissipation of the multiplexer. Please let me ask one more question. How should other logic ICs estimate it? ex) SN74LVC2G32
Rds(ON) is not described for logic devices. If so, how…