Search tips
Showing 31 results View by: Thread Post Sort by

  • SN74LVC2G34: Short Circuit Current

    • Resolved
    Part Number: SN74LVC2G34 Customer is using SN74LVC2G34DBVR to drive an external LED via via 49.9ohm

  • RE: TXB0102: Can this device support SPI translation at 12MHz? 5V to 3.3V.

    Hey Harini, This device can be used for SPI but it's also easily influenced by the loading due to its auto direction sensing architecture. If you are only doing down translation with unidirectional signals, you can use the SN74LVC2G34 device which...

  • RE: SN74LVC2G34: Device Geometry

    Hi Clemens, Thank you very much

  • SN74LVC2G34: Use on PWM

    • Resolved
    Part Number: SN74LVC2G34 Hi Sirs, Sorry to bother you. We would like to know does SN74LVC2G34DCKR

  • RE: ISO7742: ISO7742 used for GPIO isolation

    The outputs are designed for ±4 mA at 5 V. If you try to draw larger currents (up to the absolute maximum rating of 15 mA), the voltage drop might become very large. To be able to drive larger loads, you indeed should add a stronger buffer (e...

  • RE: SN74LVC2G34: Can I gang 4 of these together to increase current drive (trying to drive a 15meter cable), or do we get contention issue due to part-part input to output prop delay.

    Hi Bahram, You can find out how to estimate the output impedance by referring to the FAQ below: https://e2e.ti.com/support/logic/f/151/t/742466?tisearch=e2e-sitesearch&keymatch=faq%3Atrue

  • SN74LVC2G34: maximum speed could support

    • Resolved
    Part Number: SN74LVC2G34 Dear Team, May I know what is the maximum speed of SN74LVC2G34 ? Can

  • SN74LVC2G34: What will SN74LVC2G34 output if GND floating

    • Resolved
    Part Number: SN74LVC2G34 Hello there, We have a circuit need a buffer to drive a MOS Q1

  • RE: TXS0108E: level shift for SPI and UART

    So you need to shift ten channels up, and two channels down? Translating from 3.3 V to 5 V could be done with shifters like the SN74LVC8T245 and SN74LVC2T45, but these particular voltages can also be handled by plain buffers with TTL-compatible inputs...

  • RE: SN74AUP2G241: 2 ch buffer

    Hey Bonnie, Probably won't have a device with those exact VIH/VIL values, but you can use the SN74LVC2G34.

Didn't find what you are looking for? Post a new question.


All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI worldwide | Contact us | myTI login | Corporate citizenship

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2020 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy policy | Terms of use