Part Number: SN74TVC16222A Tool/software: WEBENCH® Design Tools Hello TI
I has some questions about SN74TVC16222A application.
My test environment was level shift between 3V3, 1V8 that I reference the measure circuits.
The B side 150 ohm resistance is…
Part Number: SN74TVC16222A I would like to run a transient sim with the 74TVC16222A or a similar part. I can not find any like it in the Tina library. I do see a HSPICE model for another TVC part but we don't have HSPICE here.
Anyone have a recommendation…
Other Parts Discussed in Thread: SN74TVC16222A Does TI offer a service that could up-screen the SN74TVC16222A to the automotive/military temperature range?
Thanks,
--Bill
Hi,
We have deigned in the voltage clamps and find that after 30 minutes of hot soaking at +95°C the clamps stop working properly.
Is there a suitable replacement that operates from -40°C to +125°C? I am looking at the LSF family but there are many…
Hi,
From the datasheet it would appear that the clamp channels are protected for negative voltage swings.
Are the channels protected from a maximum voltage swing, say in excess of 7V?
I.e. if the clamp is setup to translate 5V CMOS to 3.3V CMOS and the…
Other Parts Discussed in Thread: SN74TVC3010 , SN74TVC16222A , SN74TVC3306 Customer request;
I need some support from TI regarding HSPICE models for the SN74TVC3010. In reality, we need HSPICE models for the SN74TVC16222A, but there are no models on TI’s…
Other Parts Discussed in Thread: SN74TVC16222A , SN74TVC3010 Hi,
We are right in the middle of hardware qualification testing and we are seeing a low temperature problem with the TI voltage clamps that has not appeared prior to this.
We are currently…
Other Parts Discussed in Thread: SN74TVC16222A Hi,
We are using the SN74TVC16222A between a 5V microcontroller and a 3V3 Flash ( the 5V version Flash is obsolete), to convert the Address & data buses between 5V and 3V3 logic level. According to the…