Part Number: TCAN-SOIC8-EVM Tool/software: Hi
Please provide the CE/EU Declaration of Conformity for TCAN-SOIC8-EVM
The product is CE-marked and active in our portfolio, and we are missing the CE/EU DoC. It is not found on the T.I website either.
Thank…
Part Number: DEM-FDA-SOIC-EVM Tool/software: Please share below required details.
S.No
Mfr. Part Number (MPN)
Tape Width & Pitch in mm
Pin1 Orientation (In Tape & Reel Packing)
Packaging & Datasheet link
Is MPN Active/Obsolete?
1
UA…
Hi Gareth,
We recommend to use TCAN1057A-Q1 for new designs. The old TCAN1042&1051 part are no longer recommended unless customer need ±70V bus protection feature of the H-variant. For the reference design please use the TCAN1042DEVM as a start,…
Hi Wallace,
Unfortunately, we do not share the Tiva FW image here. The current options are to use a generic I2C EEPROM flashing device (something similar to the Aardvark or potentially the SOIC8 device), blue wire from the TPS25750EVM, or use the TPS25751EVM…
Hi Daowei,
Thanks for the information. TCAN4550 should be enabled in the prebuilt binary.
Could you confirm that the HW setup? On the EVM, switches S1.6 and S4.4 should be on to enable SPI and the TCAN-SPI connection and press the CAN_WAKE switch (S6…
Part Number: AWR2944EVM Tool/software: Hi, I have come up to know there should be a specific CAN-FD to be used at EVM for data over can, I have a link for TCAN - https://www.mouser.in/ProductDetail/Texas-Instruments/TCAN1463EVM?qs=By6Nw2ByBD1dEN9DmtLyfg…
Part Number: TCAN4550 Tool/software: Hi team,
Customer is using TCAN4550 EVM connect into their system, they are debugging. Get following question for
1. Send: According to a demo found online, when calling TCAN4x5x_MCAN_WriteTXBuffer and TCAN4x5x_MCAN_TransmitBufferContents…
Hello Kim,
Please provide a complete set of differences between the TI EVM and custom HW. You can view the table below for reference.
Board Components
TI AM62A SK EVM
Custom board
LPDDR4
Micron MT53E1G32D2FW-046 AUT:A
PMIC …
Part Number: TCAN1042DEVM Hi, I am trying to establish MCAN external loopback communication. My setup includes a AM62A, connected to the TCAN, which is connected to a PCAN module, and the data can be viewed on PCAN view software. The connections for TCAN…
The AM62 SKs support CAN-FD, but do not carry a CAN-FD transceiver to experiment with. Hence, to test the full functionality of CAN, we need to connect an external transceiver. MCU+ SDK contains internal loopback example, in this guide, we will modify…
