Hi Suning,
Suning Li said: because my test voltage is 35V, higher than Maximum common voltage 30V, so we meet an error? am i right?
The answer is likely yes. Note that 30V is not the absolute max (it is 70V for the "H" device). So the transceiver…
Part Number: TCAN1043HG-Q1 Hi Expert,
Have a nice day! I have question need your professional support:
For TCAN1043HG-Q1, the Max Vbus of CANH/L is 70V, which means CANH/L can tolerance 70V voltage:
My question is what is the max value of the…
Part Number: TCAN1043HG-Q1 Tool/software: Can you help me identify this device?
The datasheet gives no indication of how to tell the difference between the H and non-H variant, but this is important to me as the H variant can withstand 70V rather than…
Part Number: TCAN1043HG-Q1 Other Parts Discussed in Thread: TCAN1043DEVM Tool/software: Hi expert,
Is there any special attentions for C2, C6, C7 in CAN FD application compared to 2Mbps CAN? There is no value description in TCAN1043DEVM user's guide…
Part Number: TCAN1043HG-Q1 Other Parts Discussed in Thread: TCAN1043 , Tool/software: 1.If the CAN controller uses the PLL to generate the operating clock frequency (either 40 MHz or 80 MHz), the long-term jitter of the PLL must be less than 2ns. Can…
Part Number: TCAN1043HG-Q1 Tool/software: Hi expert,
My customer (Enpower) is looking for 48V CAN devices, and I have promoted TCAN1043HG-Q1 to them. But they think the 70V Absolute Maximum Voltage of TCAN1043HG-Q1 is too low for 48 V battery. The maximum…
Part Number: TCAN1043HG-Q1 Other Parts Discussed in Thread: TCAN1043 Dear all
In the system of 48V, I need to calculate the power of terminal resistors, when the Vbat comes to 56V and the situation "short circuit" shows up.
So I should refer to the…
Part Number: TCAN1043HG-Q1 Tool/software: Hi,
For the TCAN1043HG-Q1 chip, considering the need for a short power supply test - such as a CANL short power supply, the bus voltage VCANH will increase rapidly, then what is the time for this voltage rise…
Part Number: TCAN1043HG-Q1 Other Parts Discussed in Thread: TCAN1043 Tool/software: Or one of Our Customer project we are using TCAN1043 and Utilizing INH Pin as wakeup.
Issue is very random where EN & STB Pin is High , Low respectively during Transceiver…
