Part Number: TCAN1162-Q1 Tool/software: We are powering our entire design with 5V ; hence we are using 5V for CAN Transceiver IO supply ,which is possible as per the datasheet.
But in the electrical spec of RXD and TXD pins ,spec is provided for VIO…
Part Number: TCAN1162-Q1 Tool/software: Hi,
Purpose: Customers need to perform initial programming.
After waking up, the TCAN1162 enters sleep mode. However, because the initial MCU I/O is 0, nSLP is low. This causes the CAN bus to remain inactive…
Part Number: TCAN1162-Q1 Tool/software: We are facing problems with the waking up of TCAN1162 transceiver. We managed to put it in to sleep but couldn't wake up using a CAN WUP frame. We also have some confusions on the states of this transceiver. We…
Part Number: TCAN1162-Q1 Tool/software: While CAN in low-power sleep mode ,INH pin will enable the regulator in case of any Wake-up event detected. Is our understanding correct ?
Part Number: TCAN1162-Q1 Tool/software: Hi Team,
Customer is asking to check TCAN1162-Q1 Internal LDO power 5V, current capacity, please let me know it?
BR
Lenny Lee
Other Parts Discussed in Thread: TCAN1162-Q1 Hi, Support team
about TCAN1162-Q1 max power consumption
PD=(TJ-TA)/Theat JA= 3.3W?
or reference TCAN1162-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA have show Power dissipation…
Part Number: TCAN1162-Q1 Hello,
I'd like to know how MCU control the TCAN1162-Q1 exit sleep mode? From the datasheet it can be wake up by WAKE pin, or (nSLP =High & Vio > UVior). But now I can only exit the sleep mode with WAKE pin. MCU put nSLP pin…
Part Number: TCAN1162-Q1 Hello,
We are using local wake up pin for enabling the LDO. In our case after applying Vsup as 12V the INH pin is getting high which is turning ON the LDO. Without applying wake up signal INH is getting high.
We want the design…
Part Number: TCAN1042V-Q1 Other Parts Discussed in Thread: TCAN1162-Q1 Hi Experts,
Good day!
For CAN Transceiver's TCAN1042V-Q1 and TCAN1043V-Q1 and TCAN1162-Q1 - for CAN-FD, HS-CAN, and MS-CAN modes operation - can these devices meet the requirement…
