Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 , TCAN4550-Q1 Hi,
I am trying to interface TCAN4550 to a Linux based processor via SPI. This is my device tree configuration.
&spi1{
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hi,
We use T1CAN development board for simple communication with PCAN, encountered the following problems: 1. The register configuration of the board is completed. After sending CAN frames…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: MSP430FR6989 , TCAN4550 Hello,
I am trying to connect TCAN4550EVM to my STM32F407VET6 board and I'm stuck in the first step. I can't even read the device ID correctly. What I got from address 'h000…
Part Number: TCAN4550EVM Hi,
I am trying to power my tcan4550evm by connecting to VBAT pins on J9 with an input of 6 V but I am not sure if the board is receiving power as there are no leds turning on. I am ultimately trying to send signals from awr1432…
Hi Jonathan, thank you for the so many detailed instructions.
Since there is only one TCAN4550EVM-Q1 in my group, I'd like to avoid anything risky right now. But I'll keep them in mind. I plan to develop a feasible application of TCAN first with most…
Hi Abhijeet,
A change in register 0x1050 from 0x5800 to 0x8800 shows that bit 15 is set informing us that a TX Event FIFO Element is Lost. After this, the communication is halted.
From an earlier post you shared the MRAM configuration that shows there…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550-Q1 , TCAN4550 Hi Expert,
My customer is using TCAN4550-q1 in their projects.
When customer do the high and low temperature cycle test, they found that:
TCAN4550 has no response. INT is high…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550
Hi,
My setup has a thingy53 connected to TCAN4550 EVM using a bunch of connectors.
I followed the software demo code and was able to establish SPI communication, there by successfully…