Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hi Team,
We are testing CAN bus communication by using our application. We have connected one can slave and can analyzer for debugging.
We are trying to send and receive custom messages…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550
Hi TI Team,
We are using TCAN4550 EVM with IMX8MN Nano EVK.
We are loading 3 drivers for TCAN4550 module.
1)insmod can-dev.ko
2)insmod m_can.ko
3)insmod tcan4x5x.ko
It is showing below…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hello,
I am currently working on a development project where I want to send values to the TCAN4550 EVM from the Arduino UNO so that the values are transmitted/sent to the CAN Bus and after…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hello all,
I migrated the driver library for the TCAN4550 demo code to our target platform and then tried to send the same data as the example by TCAN4550EVM. But encountered some problems…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hello;
I am attempting to interface the TCAN4550 EVM with a non TI MCU and am running into some issues. I am using the example project and changed the AHB functions to fit the SPI library…
Part Number: TCAN4550EVM Hi team, Could you tell me about the dimensions of EVM? My customer wants to put an EVM in their chassis. If you have a 3D model, please share it. Sincerely. Kengo.
Part Number: TCAN4550EVM Hello,
We are trying to design a new CAN-FD based partial-network test bench.
I understand that when we try to send a CAN message which is not matching with WUF masked ID to sleeping network, it is normal to occur no-ACK error…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 Hello,
I wrote my own little code to send a SPI message from my Infineon TLE9869QXA0 to the TCAN4550.
I want to read a simple register and send the following array: {0x41, 0x00, 0x00,…
Part Number: TCAN4550EVM Other Parts Discussed in Thread: TCAN4550 I am trying to connect to a classical CAN Bus using the TCAN4550EVM, but I am not receiving a CAN message.
I got the version of the board I am using with SPI, but it is 3.2.1 from the…