Part Number: TDA2SX
Hi, expert
I want to create a virtual LAN on the tda2sx platform with vlan_id = 1, but there seems to be a problem. The log is as follows. But creating other IDs is not a problem. Can you help me
log:
I suspect that the version…
Part Number: TDA2SX Other Parts Discussed in Thread: TDA2 HI this customer is very important for us, could help on this question?
（Based on the（PROCESSOR_SDK_RADAR_03_08_00_00）framework）
I initialized McSPI in the IPU1_0 kernel， I use the API in the…
Part Number: TDA2SX Hi Team,
Download on the diamond programr software using the HW-USBN-2B downloader.
1) The normal download can be done using the SSPI SRAM, as shown in the following figure:
2) Error reported using SPI flash download as shown…
Part Number: TDA2SX Other Parts Discussed in Thread: LP87563-Q1 (Sorry if this sounds ridiculously fundamental...)
We have LP87563-Q1 PMIC connected to TDA2SX by I2C buses.
The corresponding pins on TDA2SX are
MCASP1_AXR0 …
Part Number: TDA2SX Other Parts Discussed in Thread: AM5728 Hi,
we are using AM5728 in a custom board and board is booted using mSATA. we are getting following error after booting-
after this error system gets hanged and we are not able to use it…
Part Number: TDA2SX
Hi Dears:
I found that the timing of TPS659039 is wrong, which leads to high current in TDA2SX;
Help confirm, is there a timing requirement for the 3.3V&5V input marked by the red circle in the figure below? In the actual application…
Part Number: TDA2SX Other Parts Discussed in Thread: TDA2 Dear Supporter,
Due to short of I2C ports, we try to take I2C bitbanging solution. Is there any example of software demonstrated ways to implement such feature on TDA2? Thank you very much…
Part Number: TDA2SX Hello Engineer
I use VIN1A and VIN2A of TDA2SX to receive FPGA data, data bandwidth is 16bit，VIN interface uses falling edge sampling.
Testing found that CLK=50MHz data transmission is working normally, but data transmission errors…
Part Number: TDA2SX Hi team,
Using the TDA2XX processor, hang uart3 on A15 (MPU0) using official routine tests. The test is as follows:
1) Data can be received and sent normally using polling.
2) Based on the first point, when a customer reference…
