Part Number: Hi Expert,
My customer have some questions about TL16C550D,
Question1,
Could you please let me know the data buss state at Reset condition?
(e.g, High-Z?)
Question2,
If TL16C550D resisters will be accessed at reset condition, What value…
Hello,
I used TL16C550DIZQS, BGA Package type for UART communication.
In ZQS package, It doesn't have /RI, /DCD, /DSR pin but sometimes it make interrupts from DSR, RI, DCD.
When Interrupts occure from DSR, RI, DCD, it doesn't work, so I disabled…
Other Parts Discussed in Thread: TL16C550D Hello, I have a question about TL16C550D.
About chip select terminals (CS0, CS1, /CS2).
Is pull-up resistance at the IC outside necessary? In addition, is there a resistance element in the IC inside?
Regards, Dice…
Other Parts Discussed in Thread: TL16C550D Hello,
My customer uses the TL16C550D.
He uses that under conditions as attach file.
2133.1805.TL16C550D_timing.pdf
According to the datasheet, the hold time CS valid after /RD is 10nsec (min.).
But his CPU format…
Hello, all
Now we are designing our system with TL16C550DIPFB, then would like to clarify whether our configuration is correct.
Please see the enclosed file, and feedback us with your comment.
(I apologize that full schematic is not permitted to disclose on…
Other Parts Discussed in Thread: TL16C550C , TL16C550D Hi Sir,
We have used TL16C550C many years. Now, we want to replace TL16C550C to TL16C550D.
We have a problem. When we tx " FB,FC,FD,FE,FF" code, the RX always receive "00" code. …
Other Parts Discussed in Thread: TL16C550D I have a TL16C550D ACE being used for RS485 communication on a custom board that is controlled via a Virtex 6 FPGA. I seem to be having issues setting it up though. Right now I am feeding in a divided down clock…
Part Number: TL16C550C Other Parts Discussed in Thread: TL16C550D Hi there, I was looking at TL16C550CIFN and TL16C550CIFNR. The TL16C550CIFN shows NRND but the TL16C550CIFNR is Active, and seems like a larger reel. Is this device in fact under lifetime buy…
Part Number: TL16C2550 Other Parts Discussed in Thread: TL16C550D ,Hello,
"RESET is an active high input." written in the datasheet.
However, D0-D7 state seems to be not Hi-Z during keeping input H to the RESET terminal.(output state)
After change…