Hi Ece,
Thank you for clarifying your proposed system design.
Yes, you can use an external refclk with TLK10022 and TLK10081 instead of a PHY clock output. In the receive direction of the TLK (HS input to LS output), I expect the LS outputs will be in…
Part Number: TLK10081 Good Day,
i want to transmit and receive SGMII (1,25Gbps) Signals, via the TLK10081 Device.
LS Input --> 8 Lanes SGMII -- HS Output --> 10Gbps SFP+
The Lane Order would be important.
Can you give me please a recommendation…
Part Number: TLK10081 Hello Community,
i would have a Problem because of the IBIS Model of the TLK10081. I want to let do Simulations for Signal Integrity, for this Part. Unfortunately, the IBIS Model, i can get from the Download Page, do not support…
Hi Raul,
I see, it looks like this part converts RJ45 to SFP but does not convert 1000BASE-T data to 1000BASE-X data. Therefore a data converter is needed to use with TLK10081.
Best,
Lucas
Part Number: TLK10022 We would like to setup a BER test using loop backs connecting HS TX transmitting PRBS pattern to HS RX inputs and monitoring for bit errors detected.
Is there a way to understand what the EVM GUI is doing so we can replicate it in…
Part Number: TLK10081
Hi, We have a setup where we aggregate 8x625 Mbps links to 1x5.00 Gbps link. We only use the TLK10081 in TX mode. With the data generator chip in idle mode it generates 0xBC characters. We configured the TLK10081 to replace this charackter…
Part Number: TLK10081 Good day,
I was wondering if I could use Channel B of the TLK10081 as a redundant output, In the sense that I would have two copies of the high-speed interface signals?
Thanks in advance.
~Boris
Part Number: TLK10081 Good day!
I want to aggregate 8x 640Mbps links on the low speed side into a single 5.12Gbps link on the high speed side. According to table 5.2 and 5.3, my desired 5.12Gbps is slightly out of the supported PLL range. In a demonstration…
Part Number: TLK10081 Hello,
My customer is working on an ECU that will take in multiple FPDLink video streams with a quad FPD-Link hub, send the data to a SoC to aggregate the channels together, then send back out over a FPD-Link serializer at up to…
Part Number: TLK10081 Hello sirs,
I'm planning to employ the TLK10081 for mux/demultiplexion or six Gigabit Ehternet channels in the same way as Application Report: SLLA347 but after reading througly the datasheet and the report I have some questions…