Part Number: TLK110
The following issue has occurred with TLK110. Do you know the cause of the problem, or what we can do to resolve the issue?
・when the HUB and JJ (LAN relay adapter) are inserted and removed, an abnormal frame is received between opposite…
Part Number: TLK110 Hi
TLK110 is seted 10BASE-T Half Duplex, Auto-Negotiation Disable.
(Address 0x0000 BMCR register set 0x0000)
In this setting, If address 0x001A 10BTSCR Register BIT7 NLP Disable set 1.
How is PHY Operating?
I think FLP(Fast Link…
Below are the inputs:
These values come from the PHY datasheet
MaxPortTxDelay = "86"
8.4 TX_CLK Phase Shift Register (TXCPSR)
This delay can be up to 40nS
9.7.6 100Base-TX Transmit Packet…
Part Number: TLK110 Use s32k148 + TLK110 to implement the Ethernet function through the lwip protocol. On NXP's S32DS platform, the underlying driver code is generated by configuring tcpip_middleware: tcpip components and I/O pins. At present, there…
What I have found out so far trying things with TLK110, is as follows: (might be intersting for others that are in the same situation as I was) 1. Register 0x0027 TLK110 has a register 0x0027 that works the same as in DP83822 for 10BASE-T mode (I do not know…
Part Number: TLK110 Other Parts Discussed in Thread: TLK111 , Hi,
What is the difference between TLK110 and TLK111?
I have checked their both datasheet but I cannot find differences. I have read in the forum that the timestapping is some kind of different…
Part Number: TLK110 Hello,
Do you have any data about the link-up time to complete under below condition?
My customer needs the link-up time for reference.
1) Auto MDIX is enabled
2) Auto negotiation is enabled
I got the issue you are talking about. But, to debug this, we don't have ample support as TLK110 is phased out.
Do you mind letting me know the development stage you are current in with the TLK110 PHY? If it's not too late, can you please…
Part Number: TLK110 To whom it may convern,
I am using ethernet of TM4C1294 internal PHY (according to TI, this PHY is TLK110), I verified that my ANEN/ANMODE register setting are same as the datasheet table 20-20 and 20-21, but I found that forced 10BaseT…