Part Number: TMS320C6654 Hi,
The customer is developing their products with C6654, C6655 or C6657. These depends on the model, low-end to high-end.
Is it possible to detect which device C6654 or 55 is by software ? Do they have Device ID in the ROM ? …
Part Number: TMS320C6654 From the generic PCIe documentation for Keyston 66x devices I read "In the PCIe boot mode, the RBL configures the BAR registers, the number of windows, and their sizes to provide memory access to the host. The different BAR…
Part Number: TMS320C6654 With the 'old' DM642 with a PCI interface any x86 BIOS can access and identify the DM642. Consequently, after booting e.g. Linux in the host, the DSP will be found over PCI and memory map can be programmed. With that I can load…
Dear Customer,
Sorry for the delayed response.
For flashing the images into EVM, please visit the Processor SDK RTOS guide : http://software-dl.ti.com/processor-sdk-rtos/esd/docs/latest/rtos/index_how_to_guides.html#flash-bootable-images-c66x-k2h-k2e-k2l…
Hi,
Sorry for delayed response. Registers (L2EDCPEC and L2EDNPEC) will only count the correctable and non-correctable error detection events till device is reset (when error is handled, counter would not decrement).
To detect single bit error we need to…
Hi,
Sorry for delayed response, Please refer the following link
https://www.ti.com/lit/an/sprabk8/sprabk8.pdf
In the document, follow example 5 and 6 and to check for the PCIe configuration in your code. Make sure PCIe works by connecting two EVMS with…
Part Number: TMS320C6654 Hi,
I'm using CCS 10.1 on windows 10 (1909) 64 bits and want to upgrade to CCS 10.3, but I get the following error during installation:
I read several thread on installation issue but never with this issue. Can you help…
Part Number: TMS320C6654 Hi TI Team
We use TMS320C6654 this dsp for radar signal processing, we need to use SPI to control the external adc device (some adc devices only support 3-wire SPI interface), so we need to confirm whether TMS320C6654 can support…
Part Number: TMS320C6654 Other Parts Discussed in Thread: TMS320C6678 Hi Team,
We are planning to use XDS 100 or XDS 110 Emulator in our design for tms320c6678. Please confirm this processor will support for the debugger, is there any recommendation for…
Hi, The McBSP is uses the BCLK edge, not the FSR/FSX edge. FSR/FSX must be in a valid state at the edge of BCLK (rising or falling depending on polarity). At that first BCLK edge the frame will begin. You can trigger on FSR/FSX with a GPIO, and then start…
