Part Number: TMUX6234 Hello,
I am currently designing a circuit which drives switching inputs for an RF switch. These inputs require either appr. -30 V or 0 V, so I found wiring the TMUX6234 to -30 V and 3.3 V to be a suitable solution for controlling…
Part Number: TMUX6234
In our application Signal level at A and B pin is +/-3.3V .
Common Gain_SEL pin is used to control 4 channels simultaneously.
MUX IC will be used to select the R1 register of amplifier. Respective register will be connected…
Part Number: TMUX6234 Tool/software: Subject: TMUX6234 Configuration for Differential Signal Switching – Clarification Needed
Hi TI Team,
I’m planning to use the TMUX6234 to route differential signal pairs , and I’d like to clarify the truth table…
Part Number: TMUX6234 Tool/software: Hi,
I have received the attached part from one of my vendor.
But after assembly the part is not working properly.
Please see the attached part image.
Can you please decode the batch number and confirm whether…
Part Number: TMUX6234 Other Parts Discussed in Thread: TMUX8212 , AM26LV32E Tool/software: Hi All,
Are there any multiplexer products that can switch RS422 differential signals?
In past E2Es, there were comments that this could be achieved with the…
Part Number: TMUX6234 Hi，
The customer has the following problems when using this chip, please help to analyze.
1. When CTL2_6234=0 and CTL3_6234_EN#=0, VDDA=VDDA2=13.5V, U9 is off, but the voltage measured at D1 pin1 is 13.5V.
2. When CTL2_6234…
Part Number: TMUX7234 Other Parts Discussed in Thread: TMUX6234 , , TMUX7219 I think that the TMUX7234 and TMUX6234 PSPICE models are incomplete because they do not have definitions for any of the subcircuits used in the model. I was initially trying…
Part Number: TMUX6234 Other Parts Discussed in Thread: TPS22919 , TPS2H160-Q1 , TPS2121 Tool/software: I need a part which is working in 5V supply with above 500 mA source and sink current
It should be in 40 degree Celsius
Reference part number…
