Part Number: TPD2E1B06 Hello,
I wonder what the leakage current is for the specified VRWM Reverse standoff voltage of 5.5 V (regarding the component TPD2E1B06).
In the datasheet the leakage current is only given for a VBIAS = 2.5V (max 10nA).
In…
Part Number: TPD2E1B06 Dear Sir,
MY customer complained the CL2 value will cause their system function fail!
In datasheet, the typ. value of CL2 is 1.05pF, but it is not a fixed value and did not provide the min. and max. range!
My customer found…
Part Number: TPD2E007 Other Parts Discussed in Thread: TPD2E1B06 Hello,
I have a question about the difference between schematic of TPD2E007 and TPD2E1B06.
[Q] - Schematic of TPD2E007(D/S p6)
- Schematic of TPD2E1B06(D/S p1)
What are the intentions…
Part Number: TCAN334 Other Parts Discussed in Thread: TPD2E1B06 , TPD1E10B09 , TVS0701 , TPD4E101 , TCAN3413 , ESD2CAN24-Q1
Tool/software:
I am trying to diagnose why our CAN transceivers keep breaking somewhat arbitrarily when the modules are connected…
Hi Tom,
TCA9539's esd ratings are shown in table 6.2.
ESD +/-10kV is outside datasheet spec.
Like Clemens has suggested, to improve ESD protection, consider using some external ESD protection. TI has a team dedicated to protection devices and…
Apologies for the 2 days late reply,
Here is the schematic. I think i did it correctly, on me though for not noticing it in the posted post
I based this circuit on the example circuit given by the datasheet, the TPD2E1B06 is just an ESD protection…
SY,
We do have ESD solutions with leaded package
Just for the record, you can always filter by package on TI.com product selection pages like in image.
Also, here is a link to all our esd solutions with SOT-23 packages
To replace ESD122…
Other Parts Discussed in Thread: PSPICE-FOR-TI Back to FAQ Home Page
Interface Protection Guides
Part Recommendation
Packaging & Layout
Models
Transient Standards
System/Device Level Design
Power Dissipation…
Rainer,
Just to clarify, I'd misspelled the ESD device that I'd written in my last post. The device should be the TPD2E1B06 (again, I've never tested these).
Also, the BAV199 may have a high forward voltage of 0.9V at 1mA, so it may still require…
Other Parts Discussed in Thread: TPD2E1B06 , TLK110 Why not use 2 x TPD2E1B06 instead of 1 x Semtech SLVU2.8-4 on the DK-TM4C129X?
Reference: Tiva C Series TM4C129X Development Board User's Guide Find, "SLVU2.8-4"
Customers refer to this reference…
