Other Parts Discussed in Thread: TPS61301 hi,
i was seeking one schematic based on OMAP4. where this IC TPS61301 was used. it is mentioned that this IC is being used as audio hands free boost converter. but when i see the datasheet this is LED driver…
When using the hardware mode, ENVM, you are restricted to a fixed output voltage of 4.95 V.The voltage is adjustable via I2C from 3.825 to 5.7 V in 0.125 V steps using the
OV[3:0] registers . See the datasheet page 61.
Other Parts Discussed in Thread: TPS61301 , TPS61032 , TPS61030 As I am developing a new batterie powered device for my company I found the TPS6103x Series as a very efficent and suitable DC/DC Regulator. However even after careful study of the datasheet…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
