Hi Zbigniew:
Just confirmed by product engineer, The absolute max temp at the junction is the absolute max for the process technology.
For the process technology of TUSB4041-Q1, The absolute max temp at the junction is 125C.
Regards
Brian
Part Number: TUSB4041I Other Parts Discussed in Thread: TPS2000C Hi TI Team,
We are using a USB HUB Device "TUSB4041IPAPQ" in our Design. Where we are planning to use the Device without any external Programming (Non-Programmable). As per the datashee…
Part Number: TUSB4041I Other Parts Discussed in Thread: TUSB4020BI , , TUSB4041PAPEVM , TUSB4020BPHPEVM , TS3USB221 Hello,
We use TUSB4020BI + 2 x TUSB4041I in our system to create 8 downstream ports from USB host controller.
The system is portable and all…
Part Number: TUSB4041I Hi experts!
Could you please tell me what to do with the unused terminals of TUSB4041I?
This circuit is designed with reference to the evaluation board. Is there any problem with the following?
Best Regards
Part Number: TUSB4041I-Q1
HI,
I developed my pcb with TUSB4041 (it is based on reference design from TI). Unfortunatelly after connecting it to Raspberry Pi Zero W 2 it is not recognized as usb-hub but 'vendor specific class'. To the chip an eeprom is…
Part Number: TUSB4041I I am designing a board which has four ICs (FT4232H Quad High Speed USB to Multipurpose UART/MPSSE IC) capable of converting four serial RS-232 signals into one USB differential signal, all of which operate in USB2.0 standard protocol…
Part Number: TUSB4041I Dear Specialists,
My customer encountered similar trouble.
Could you please let us know the way to PWRCTL1/BATEN1 high?
---
I powered on the TUSB4041 with the following configuration. However, the output of PWRCTL1/BATEN1 did not…
Part Number: TUSB4041I-Q1 Other Parts Discussed in Thread: TUSB4041I
Is this 10pf capacitor the capacitance of the entire link or the capacitance inside the transceiver?
Part Number: TUSB4041I Hi
Confirm the following questions: as shown below
1. The red part should be the bare copper area
2. The blue and green circles should indicate Gnd Via
3. Is the via in the blue circle necessary? What is its function? I think…
Part Number: TUSB4041I Hello Team,
as we don't have a 7 port hub in our portfolio could I use 2 TUSB4041I and connect the 2nd to one output of the 1st to get 7 outputs?
Thank you and best Regards, Hans