Answered

• TUSB8041EVM: Apply EVM

  

  Kuan Wei Chen (Kevin Chen)

  Resolved

  Part Number: TUSB8041EVM Dear Team, May I apply below EVM? I can't find it on below link BR Kevin

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• RE: TUSB8041A: TSB8041 not work, use tusb8041 for a TYPE-C dock desigen, the pc can recongnize 2 universal superspeed USB hubs, but the USB flash drive or other USB devices can not be used

  

  wenbang zheng

  Resolved

  Hi Brian and other who may pay attention I used the same TUSB8041 circuit to independently make a HUB PCB for testing, the hub test is OK, USB3.0 and USB 2.0 work fine. So TUSB8041 chip and TUSB8041EVM circuit is OK, it works. There is a problem with my…

  • 2 months ago
  • Interface
  • Interface forum

• RE: TUSB8042A: Problem: USB 3.X hub is not connected in the port reset failed state, and 2.0 is connected successfully.

  

  dongbin lim

  Hello Brian I soldered thermal pad to ground. And schematic is same as TUSB8041EVM. I orderd from PlanBnet, which is on of the electronic part distributor in Korea. I made 10 PCBs and all of them have same problem. Regards, Wonhwi.

  • 4 months ago
  • Interface
  • Interface forum

• TUSB8041EVM: Layout files for TUSB8041EVM

  

  Samuel Studebaker

  TI Thinks Resolved

  Part Number: TUSB8041EVM I was hoping to get the layout/Gerber files for the TUSB8041EVM.

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• TUSB8041EVM: Layout files for TUSB8041EVM

  

  Samuel Studebaker

  Resolved

  Part Number: TUSB8041EVM The file was shared with me on E2E but it wouldn't open in Eagle due to a start tag expected error. Is there a way I can fix this or can I get the file sent over email?

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• TUSB4041I: Obtaining TUSB8041EVM design files.

  

  Ricky Martin

  Resolved

  Part Number: TUSB4041I Other Parts Discussed in Thread: TUSB8041EVM , TUSB8041 How do you go about obtaining the layout files including gerbers for the TUSB8041EVM? Thank you, Ricky.

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum

• TUSB8041EVM: TUSB8041EVM HW Design File Request

  

  Kuo Duke

  TI Thinks Resolved

  Part Number: TUSB8041EVM Hi team, Could you help provide TUSB8041EVM .dsn and Layout file? thanks.

  • over 6 years ago
  • Interface
  • Interface forum
Answered

• TUSB8041EVM: Request for TUSB8041EVM reference design layout

  

  Basit Gangoo

  Resolved

  Part Number: TUSB8041EVM TI Customer Support suggested I post here to obtain reference design files. Could someone email me the board layout, schematic, BOM, etc. for the TUSB8041EVM Evaluation Module? If available for OrCAD, that would be great. Much…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum

• RE: TUSB8041: Doesn't detect USB based SDR device

  

  Brian Zhou

  did you use TI TUSB8041EVM for the test? Regards Brian

  • 7 months ago
  • Interface
  • Interface forum

• RE: TUSB8041EVM: Layout files for TUSB8041EVM

  

  Roberto Diaz

  Hello, I sent you the files through e-mail. Regards, Roberto

  • over 6 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.