Thanks for clarifying.
Apparently, I haven't been looking closely enough at the schematics (nor the dis-assembly) but I will.
If the TUSB3410 was capable of a greater speed than 9600 even when running a software UART - do you think it would be possible…
I think the only difference between the F2012 and the F2013 is the ADC (10 bit 8 channel vs. 16 bit sigma delta), so if that is not an issue you could use the ez430-T2012 daughterboards that TI sells for 3 for $10.
http://focus.ti.com/docs/toolsw/folders…
Strictly speaking yes, the Launchpad can be interfaced with the CC2530. Since most small pin count 2XX devices have no UART, SPI might be the preferred means to communicate. At > 4MHz, aviod long wires between the boards (two or three inches max.).…
For ultra-small, there are the F2012 daughter boards that mate with the EZ430-F2013 USB stick.
https://estore.ti.com/EZ430-T2012-MSP430-USB-Stick-F2012-Board-P955.aspx
The CPU on these is also much smaller than the Arduino CPU, having only 2K of flash…
Hi,
as already mentioned by old_cow_yellow you should use the LaunchPad http://focus.ti.com/docs/toolsw/folders/print/msp-exp430g2.html for this because it has a Backchannel UART for communication between MSP430 and PC.
Pls note that the MSP430F2012…
Hi Michael,
a MSP430F2012 is mounted on the eZ430-T2012 boards.
Do you know GRACE ( http://focus.ti.com/docs/toolsw/folders/print/grace.html?DCMP=Grace&HQS=Other+EM+grace )? Grace is a Graphical Peripheral configuration Tool. It is still in Beta…
I am newbie do please forgive my ignorance.[:(]
Now in eZ430 chronos watch kit they also give me a eZ430 USB programming and debugging interface now my question is can this same programming and debugging interface be used to program the eZ430-T2012 target…
Hi Hithesh,
what about buying the CHRONOS ( http://focus.ti.com/docs/toolsw/folders/print/ez430-chronos.html ) and an eZ430-RF2500T (the part with the controller and the RF chip; http://focus.ti.com/docs/toolsw/folders/print/ez430-rf2500t.html ).
The USB…
Hi MEDARZ,
the 2 additional pins were used for the (so called) Backchannel UART ( http://processors.wiki.ti.com/index.php/EZ430_Backchannel_UART_Configuration ).
Since the eZ430-T2013 (or eZ430-T2012) - this is the small PCB with the microcontroller mounted…
Hi Teeravis,
Your post tells us about the eZ430-F2013; so, when your talking about that do you sppek of this tool or do you mean the small target board attached to the eZ430U (USB Stick like part) ( like this , eZ430-T2012 target board; there is a version…