Part Number: LMH0324 Other Parts Discussed in Thread: LMH0318 , , LMH1218EVM , LMH1218 , LMH1219EVM , LMH1219 Hi Team,
We would like to ask your help regarding the customer's inquiry below.
I'm planning on developing a HD-SDI 2:1 switch using 2 x LMH0324…
Hi Kawai-San,
I have used USB2ANY box with the LMH1218EVM. On USB2ANY software I turn on 3.3V supply. Then - this turns on 3.3V on USB2ANY connector. Under this condition - I was able to run LMH1218EVM GUI and I did not have to make any change on the…
Hi Alan,
You can use LMH1218EVM for this test. These two devices have the same performance.
I was thinking about this and why there is a difference between Phabrix and Tek WFM you noted earlier. In some implementation of the FPGA at SD rate, SD rate is…
Part Number: LMH1219 Other Parts Discussed in Thread: LMH1218EVM , USB2ANY , , Hello,
Is USB2ANY the only way to program/configure the LMH1219EVM and LMH1218EVM? Can the USB ports be used for the same thing?
Thanks,
Arash
Hi Eric,
Something doesn't look right. You are getting 1.15UI of alignment jitter. I suggest if you can please get one of our LMH1218EVM for correlation and check/correlate with your own result. I expect far less jitter.
Another thing you can try…
HI Dan,
LMH1218 performs input EQ automatically until you initiate initialization settings that forces manual EQ instead. Having said this, i expect performance to be the same after POR versus if you simply do a CDR reset. It seems your test result is…
Hi Nasser,
thanks! I have just tried to order LMH1219EVM, LMH1218EVM and LMH1297EVM, but only LMH1218EVM looks like to be orderable. The other two is directing to a link to get approvel for SW download.
Could you please check and advise how to provide…
Hi Philip,
This board is a reference design and is not available for purchase.
You can purchase LMH1219EVM + LMH1218EVM + 12G SFP and these would provide the same function.
Regards,,nasser
Hi Alexander,
1). When selecting 0x4E for LMH1219, did you click on "Apply" button? Once you do this, gray should go away.
2). We regularly do the same thing in lab as well. We jumper SMBus signals plus GND from LMH1219EVM to LMH1218EVM and…
Other Parts Discussed in Thread: LMH1218 , USB2ANY , LMH1218EVM Hi Team,
I am trying to connect SigCon Architect GUI and LMH1218 on user board. However, I am failing to be connected. Is there any restriction using SigCon Architect with boards other than…