What areas are “Device descriptor info(TLV)(FRAM)” and “TI calibration and configuration(FRAM)”? Is the area used dynamically when the EVM430-FR6047 operates? Or, I wonder if this is an area where users can read and write to arbitrary…
You should be able to use an external voltage divider and the internal 1.2 reference from REF_A.
If you want your maximum voltage to be 4 V (to give yourself some headroom), you would set the divider for a 0.3 ratio.
Part Number: MSP430FR6047 Hello,
I have a problem with the MTIF module. I have conducted some tests with it and I noticed that the interval between pulse transmissions is not constant.
The module's frequency is set to 128Hz (PGFS_3), and the frame duration…
Part Number: MSP430FR6047 1.I'm sending data from MSP430FR6047 through UART, i have measured 20mA power consumtion
2.When no data is transmitted throught UART, i have measured 0.4mA Power consumption
I need to achive low power consumption when data…
Part Number: MSP430FR6047 TI,
I am reaching out to inquire about the compatibility and feasibility of utilizing donut-shaped or radial transducers in conjunction with the MSP IC for flow meter applications. Following extensive research, I have not come…
Part Number: MSP430FR6047 Hello Team,
I would like to know can we measure flow and volume with 2 Transmitters and 2 receivers in the flow pipe?
If yes, please share what are the parameters, configs and code changes to look at.
Thanks.
Part Number: MSP430FR6047 I received the EVM430-FR6037 board and proceeded to hook it up to 1MHz sensors and found that the device worked wonderfully using the USS Software. However, I have since loaded in some example programs into the device so that…
Part Number: MSP430FR6047 Other Parts Discussed in Thread: EVM430-FR6047 Hello~!
EVM430-FR6047 board and USS-02_40_00_00-windows-installer.exe are linked. My project is developing custom board . so, I tried to connect with USS using external I2CtoUSB.
…
no i didnt change " volumeCalibrationOption "...
Can you direct me exactly which setting causes them to get the same value?
when i put breakpoint he never get there,and the value "not calib" and the normal flow rate still equal... see picture…
Part Number: MSP430FR6047 Other Parts Discussed in Thread: MSP-FET , MSP430FR50431 Hello I perform an experiment on the EVM6047 so once I connect it normally, burn your demo code to it, open a GUI and get flow values of 50 (see image)
After that I switch…