Part Number: SN75DP130 Tool/software: Dear , support team. One of our distributor's customers is using SN75DP130. In the TI recommended circuit, the AUX_SRC+ and AUX_SRC- lines are connected to the GPU. However, the customer's AUX_SRC+ and AUX_SRC- are…
Part Number: SN75DP130 Tool/software: Hi team,
My customer is using SN65DP130 as DP source side redriver, and we want to configure VOD settings by ourselves rather by link training of DP130.
May I know how we can disable SN65DP130 link training and which…
Part Number: SN75DP130 Hi TI,
The architecture of our project eDP re-driver design is "DP only Configuration with AUX Pass Through" The problem currently encountered is that some machines will have intermittent images when the temperature is…
Part Number: SN75DP130 Hello team,
We need your advice to solve the system trouble with SN75DP130.
Summarized and attached about the detail. That is highly helpful if you can look into it and find a hint to solve the trouble case.
Thanks in advance. Material…
Hello, Tian,
The DP130 only provides the HBM and CDM in section 7.2 ESD Ratings of the data sheet.
These ratings are not the same as the testing that you are performing.
Thanks,
Zach
Part Number: SN75DP130 Hi Team,
Customer is using SN75DP130 in their design, but facing some no signal issues with high probabilistic, and they found it may related to DP-HPD timing. When we power supply DP130 firstly and then pull-high DP-HPD from low…
Part Number: SN75DP130 Hi Team
Customer test ESD performance in there product. they use SN75DP130 to drive the screen.
They would like to resolve the ESD black screen problem.
When they read the I2C register form SN75DP130 , They find 0x18 and 0x1A will…
Part Number: SN75DP130 Hello,
I'd like to ask for help to solve an issue that one of two displays is occasionally not recognized by SN75DP130 when a system is turned on. Please take a look at the attached spreadsheet (description of the issue) for details…
Part Number: SN75DP130 Hi,
Refer to e2e SN75dp130 lane swap thread below.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/708278/sn75dp130-sn75dp130-dp-lane-swap
How can I " manually enable all the lanes" on SN75DP130?…