Frequent Questions

  • [FAQ] TPS2373-4EVM-758: Active Bridge Rectifier Disconnect Circuit (Q18)

    Part Number: TPS23754 Other Parts Discussed in Thread: TPS2373-4EVM-758 Hi Sir, There is an Active bridge design on the TPS2373-4EVM-758 and we applied it with TPS23754 design. 1. May I know what's the purpose of the Q18 on the active bridge circuit…

  • [FAQ] CC13x2, CC26x2 Revision E and SDK version compatibility

    Please note, Texas Instruments has just released Revision E of pre-production silicon for the following SimpleLink™ devices: SimpleLink Sub-1 GHz CC1312R Wireless MCU supporting proprietary Sub-1 GHz development as well as the SimpleLink Sub-1 GHz…

  • [FAQ] CC13x2, CC26x2 Revision E and SDK version compatibility

    Please note, Texas Instruments has just released Revision E of pre-production silicon for the following SimpleLink™ devices: SimpleLink Sub-1 GHz CC1312R Wireless MCU supporting proprietary Sub-1 GHz development as well as the SimpleLink Sub-1 GHz…

  • [FAQ] CC13x2, CC26x2 Revision E and SDK version compatibility

    Please note, Texas Instruments has just released Revision E of pre-production silicon for the following SimpleLink™ devices: SimpleLink Sub-1 GHz CC1312R Wireless MCU supporting proprietary Sub-1 GHz development as well as the SimpleLink Sub-1 GHz…

  • [FAQ] How do I delete my forum post.

    Former Member
    Former Member
    (Please note - this process is only applicable for 5 minutes after the initial post. After 5 minutes, a request to delete the thread will have to be submitted in the SIte Support Forum) If you'd like to delete a post you've made to E2E support forums…

  • [FAQ] LP8861-Q1: Different ISET current setting equation

    Part Number: LP8861-Q1 Other Parts Discussed in Thread: TPS61194-Q1 , TPS61193-Q1 For the devices LP8861-Q1, TPS61193-Q1, TPS61194-Q1, the maximum current for the LED current sinks is controlled with external Riset resistor at ISET pin. But there are…

  • [FAQ] MSP430G2452: 430BOOST-SENSE1 GUI Installation

    Part Number: MSP430G2452 TI Friends & Family, There are many previous threads such as this one, that discuss the 430BOOST-SENSE1 GUI installation: Most underlying questions surround how to get the GUI.exe working. While TI has since released better…

  • [FAQ] How do I determine the output voltage (VOH, VOL) or output current (IOH, IOL) of a CMOS logic device?

    FAQ: Logic and Voltage Translation > Output Parameters >> Current FAQ The high logic level output voltage of a logic device with no load will be the supply voltage. The output current of a logic device is determined by the load connected to the device…

  • [FAQ] ADC Noise: How do you calculate the noise bandwidth of your system?

    How do you calculate the noise bandwidth of your system when using Delta-Sigma ADCs?

  • [FAQ] ADC Noise: Can clocks affect your ADC’s noise performance?

    Can clocks affect your ADC’s noise performance when using Delta-Sigma ADCs?

View FAQ threads
Recommended For You