Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: USB2ANY Hello, Where can I download the USB2ANY_2.8.2.0_SDK_Setup.exe to use the USB2ANY with the BQ79616EVM?

Other Parts Discussed in Thread: BQ25750 Hello all, Here is the BQ25750 schematic and layout checklist. BQ25750_Schematic_And_Layout_Checklist.pdf Best Regards, Munir

Part Number: WL1837MOD This new release includes firmware, driver, wpa_supplicant and hostapd updates. The links to the repository of each component is as follows: WL18xx firmware repo: https://git.ti.com/cgit/wilink8-wlan/wl18xx_fw/ --> master…

Part Number: AM623 Hi, I am having trouble locating the drive power of the oscillator MCU_OSC0_XI. I am driving an external quartz crystal using this pin but need to make sure the crystal is appropriately rated for the power dissipation it will experience…

Part Number: TLC6C5748-Q1 What's the interface of TLC6C5748-Q1 and how to program it in the 16-bit SPI format?

How can Functional Isolators correct ground shifts and improve noise tolerance on a signal line?

Part Number: AM62A7 Other Parts Discussed in Thread: AM6442 This e2e exchange: AM6442: eMMC pull-ups necessary or not? , results in a statement that the AM6442 requires no external pull resistors on the MMC0 interface, and that the processor will provide…

Part Number: TDA4VM On the TDA4VM EVM, GPIO0_0 is connected to SW10. See TDA4VM EVM User Guide for SW10 location. https://www.ti.com/lit/pdf/spruis4 Can SW10 + GPIO0_0 be used to generate an interrupt on TDA4VM A72, with QNX running?

Other Parts Discussed in Thread: C2000WARE Can C2000 real-time microcontrollers support IEC 60730 or UL 1998, and if so, what tools are available to aid in compliance with these standards?

Part Number: TPS6594-Q1 Introduction This FAQ will cover enabling the EN_DRV and the preliminaries needed for it. Since this FAQ covers both TPS6594/TPS6593 and their variants, there will be slight differences on the implementations. The only way…