Part Number: AM625SIP Other Parts Discussed in Thread: AM620-Q1 , AM625 , AM623 , AM625-Q1 , AM62D-Q1 , TPS65219 , SK-AM62-SIP , SK-AM62-LP , SK-AM62B-P1 , AM62L , AM2432 , AM62P Hi TI Experts, Can you provide a List of collaterals that can be referred…

Part Number: TDA4VM How to integrate the switch channel functionality which would select the channel to be processed in an OpenVX node?

Part Number: TDA4VM Hi, Using PDK with windows requires some pre-setup before you start building the applications. This FAQ explains the setup required for the same.

Part Number: TDA4VM Information about MDIO module in J721E/J7200/J721S2/J784S4?

Part Number: TDA4VM Other Parts Discussed in Thread: DRA829 , How to generate a PPS signal from J7 devices?

Part Number: CC2642R Other Parts Discussed in Thread: CC2652R , CC2652R7 , SYSCONFIG Hi, Here are some steps to enable synchronization with a periodic advertising train on CC2642R, CC2652R or CC2652R7. This guide assumes you are using the simple_central…

Other Parts Discussed in Thread: TDA4VM Hi Ti, How to use the policer to realise the whitelist based on mac and ip binding. My idea is to use CPSW_ALE_IOCTL_POLICER_GLOBAL_CFG to set up a whitelist, so that only the packet, which match the policer…

Part Number: TDA4VM How do we make VISS node output as graph parameter instead of capture node in the single cam application?

Part Number: TDA4VM How to reconfigure the disconnected camera or if the camera is powered off during the execution of Multi-cam demo?

Part Number: AM6442 hi, I was referring to Starter kit Schematic and EVM schematic of AM6442, I would like to know the reason for having Switched power rail which is enabled based on reset status for SD card interface. I had done the same Circuit…