Part Number: IWRL6432 Other Parts Discussed in Thread: IWRL1432 , Steps for generating the compRangeBiasAndRxChanPhase line for the IWRL6432. Similar steps can be taken for the IWRL1432, just substitute 1432 for 6432 as appropriate. 1. Load the motion…

Part Number: AM62A3-Q1 Hi TI expert, The SOC AM62A define the standard SPI interface by SPI_CS, SPI_CLK, SPI_D0, SPI_D1. If our slave device need to get MISO and MOSI data line, how will we used the D0 and D1 data line. Dose it programable? Can…

Part Number: BQ24800 ACFET/RBFET and BATFET can never be on at the same time, otherwise there would be a short from the adapter input to the battery. The process always starts from ACDET, which cannot be ignored by the controller, although it can be directly…

Part Number: BQ24800 The GUI display is written based on 10mΩ sense resistors, so the IIN_HOST register (0x3F) displays the same setting values regardless of the input sense resistor used. Therefore, the user needs to convert/scale the setting values…

Part Number: BQ24800 The full datasheet for BQ24800 currently has to be requested. On the product page ( here ), scroll to "Request more information".

Other Parts Discussed in Thread: AM62L , AM62D-Q1 I have the below queries regarding the DEVICS_ID Is there a device ID available that I can read? Can you guide me how to read the device ID? Is the ID unique for each device? Is there an ID that…

Part Number: AM625 Hello, Do we have a specification on the max drive strength/ power that AM625 can drive for both the HF crystal as well as 32 KHz oscillator? I didn't see it specified in the data sheet and customer wants to make sure they're within…

I am using a Sitara processor with a Linux core, a time sync router, and a PRU subsystem (AM62x, AM64x, AM65x). I want to synchronize the Linux system time with an IEP timer in the PRU subsystem. How do I do it? We will use AM64x for this example, but…

Other Parts Discussed in Thread: BQ27Z746 BQ27Z746 FAQ Home Page This is the home page for common questions in relation to the BQ27Z746 . FAQs Related FAQ home pages: Impedance Track FAQ home Page What information does TI need to help with…

Part Number: PROCESSOR-SDK-J7200 Other Parts Discussed in Thread: DRA821 , DRA829 , SYSCONFIG How to change/generate the “Eth” configuration for MCAL Ethernet Application from one core to other core.