Frequent Questions

  • [FAQ] DRV89xx-Q1 PWM FFh settings behaivior

    Other Parts Discussed in Thread: DRV8910-Q1 , DRV8904-Q1 , DRV8906-Q1 , DRV8908-Q1 , DRV8912-Q1 DRV89xx-Q1 (DRV8904-Q1,DRV8906-Q1,DRV8908-Q1, DRV8910-Q1, DRV8912-Q1) device has internal PWM generator. When PWM Duty is set as FFh(max), it is very close…

  • [FAQ] How to determine which MOSFETs a gate driver can support?

    Other Parts Discussed in Thread: DRV8329 , DRV832X When determining the MOSFETs a gate driver can support one of the specifications that should be looked at is the maximum average gate current that the gate driver can supply. To switch a MOSFET gate drivers…

  • [FAQ] TDA4VM: Explain IPC Mailbox allocation ?

    Part Number: TDA4VM IPC uses HW mailboxes. Which ones are used, and which ones are still available ?

  • [FAQ] TDA4VM: How to get EB Tresos studio for MCAL development and customer licence ?

    Part Number: TDA4VM How to get EB studio tool for MCAL development and If you want to run the EB Tresos Configurator for TDA4VM MCAL, a customer license is required. How can I obtain this?

  • [FAQ] TMS320C6657: How to run the direct NAND-BOOT example on TI-C6657-EVM without IBL ?

    Part Number: TMS320C6657 Hi, How to run the direct NAND-BOOT example on TI-C6657-EVM without IBL ?

  • [FAQ] BQ76952: Do the DCHG and DDSG signals on the BQ769x2 follow the CHG and DSG FET driver pin states?

    Part Number: BQ76952 Other Parts Discussed in Thread: BQSTUDIO What are some things to consider when configuring these multifunction pins?

  • [FAQ] PROCESSOR-SDK-AM64X: Licensing of industrial protocols provide in MCU-SDK

    Part Number: PROCESSOR-SDK-AM64X Hi, What is the "TI Commercial" licensing process for Industrial Protocols provided in MCU-SDK package ? Regards

  • [FAQ] PROCESSOR-SDK-AM64X: Flash Programming Options in Mass Production Phase

    Part Number: PROCESSOR-SDK-AM64X Hi, What is the recommended production method of loading in flash device during mass production? Regards

  • [FAQ] AM64X : How to Reset (Warm Reset ) the SOC from Software ?

    Part Number: AM6442 Hello TI experts, I want to make the SOC reset from software. How can I do it? What is the difference between POR (power on reset) and warm reset? This FAQ mainly explains how to Reset the SOC. And what are the registers used…

  • [FAQ] PROCESSOR-SDK-J721E: How to use TR for transfers in McSPI, instead of packet descriptors?

    Part Number: PROCESSOR-SDK-J721E By default, McSPI/SPI Drivers in PSDKRA uses packet descriptors for transferring or for receiving data to/from the SPI slave device. Sometimes it might require to use TR descriptors, because TR supports additional functionalities…

View FAQ threads
Recommended For You